sales@thenamethatsticks.com

Free delivery on orders over £500. T&Cs apply

Browse our products

Activator

Adhesive Activation

An activator, also known as a glue activator, is a product used to accelerate the curing or bonding process of adhesives. It is applied to one surface before adhesive application and promotes faster…

Filters

Filters

Adtech 1001 Cyanoacrylate Activator

Adtech® 1001 is a solvent-based activator formulated to increase the cure speed of Adtech® cyanoacrylate adhesives.

£10.00

EX VAT

Adtech 1002 Super Fast Cyanoacrylate Activator

Adtech® 1002 is a solvent-based activator formulated to increase the cure speed of Adtech® cyanoacrylate adhesives.

£88.12

EX VAT

Adtech 1006 Anaerobic Activator

Adtech® 1006 is a solvent-based activator formulated to improve the curing process of Adtech® anaerobic adhesives.

£79.85

EX VAT

Adtech 1008 Methacrylate Activator – Slow Cure

Adtech 1008 Activator is slow curing activator used with Adtech 9146, a two component structural methacrylate adhesive.

£85.62

EX VAT

Adtech 1010 Acrylic Activator Fast

Adtech 1010 Activator is fast curing activator used with Adtech 9146, a two component structural methacrylate adhesive.

£221.22

EX VAT

Adtech Mitre-Bond Kit

Adtech® Mitre Bond Adhesive kit comprises of a medium viscosity superfast cyanoacrylate adhesive and an aerosol containing activator.  It is designed for the bonding of a wide range of plastics, rubbers, timber, metal components, fabrics, ceramic,…

£23.27

EX VAT

Aro-Seal 1109 Surface Activator

Aro-Seal 1109 is a degreaser and adhesion promoter which is used in conjunction with Aro-Seal MS and Hybrid Polymers to improve adhesion on plastics.

£16.40

EX VAT

Henko 638 Activator

Henko 638 Activator is used with R300 and R305 to speed up the cure.  Highly advised when installing synthetic turf in cold weather conditions.

£13.76

EX VAT

Loctite 7649 Anaerobic Activator

LOCTITE SF 7649 is a solvent-based activator for surface preparation that provides for low temperature curing.

£15.51

EX VAT

Permabond A905 Anaerobic Activator

Permabond A905 Surface Activator is designed to allow non-metallic surfaces to be bonded/sealed. It also accelerates the cure rate of anaerobics and improves bonding to contaminated surfaces. It will also allow the adhesive to cure in a larger gap.

£17.34

EX VAT

Permabond CSA Cyanoacrylate Activator

Permabond C Surface Activator (CSA) is used in conjunction with Permabond cyanoacrylate adhesives to promote a fastercure and to extend their gap-filling capabilities.

£61.36

EX VAT

Permabond Initiator 41

Permabond Initiator 41 is used in conjunction with Permabond TA(structural acrylic) adhesives as a no-mix resin and initiator system. Its solvent free formulation allows a long open time if required.

£162.94

EX VAT

Rosehill FX1117 Wet Pour Accelerator & Primer

Rosehill Flexilon FX1117 is a low viscosity, solvent-free, single component rubber pre-treatment accelerator for use in conjunction with Rosehill Flexilon wet pour polyurethane binders.

From

£16.00£880.00

EX VAT

Woodstikk Mitre Stikk Adhesive Kit

Woodstikk® Mitre Stikk Adhesive kit comprises of a high viscosity superfast cyanoacrylate adhesive and an aerosol containing activator.  It is designed for the bonding of a wide range of plastics, rubbers, timber, metal components, fabrics,…

£13.29

EX VAT

An activator, also known as a glue activator, is a product used to accelerate the curing or bonding process of adhesives. It is applied to one surface before adhesive application and promotes faster adhesion by initiating the chemical reaction within the adhesive. Activators are commonly used with cyanoacrylate (super glue) adhesives to ensure quick and reliable bonding. They improve the speed of bond formation and enhance bond strength. Activators are particularly useful in applications where rapid adhesion is required, such as in woodworking, model making, or repairs.