sales@thenamethatsticks.com

Free delivery on orders over £500. T&Cs apply

Browse our products

Anaerobic

Instant metal part bonding

Anaerobic adhesives, also known as anaerobic threadlockers, are designed to cure in the absence of air and when confined between metal surfaces. These adhesives remain liquid until isolated from…

Filters

Filters

Adtech 1006 Anaerobic Activator

Adtech® 1006 is a solvent-based activator formulated to improve the curing process of Adtech® anaerobic adhesives.

£79.85

EX VAT

Adtech 6204 Medium Strength Nutlock

Adtech® 6204 is designed for the sealing and locking of threaded fasteners which may require easy disassembly with standard hand tools.

From

£22.98£105.01

EX VAT

Adtech 6208 High Strength Nutlock

Adtech® 6208 is designed for the sealing and locking of threaded fasteners.

From

£22.98£105.01

EX VAT

Adtech 6505 Pipe Sealant

Adtech® 6505 is designed for the sealing and locking of metal fittings and pipes.

From

£22.98£105.01

EX VAT

Adtech 6608 High Strength Retainer WRAS

Adtech® 6608 is designed for the bonding of cylindrical fitting parts, particularly where bond gap can approach 0.25mm.

From

£22.98£105.01

EX VAT

Loctite 5331 Thread Sealant

LOCTITE SI 5331 is designed for the locking and sealing of plastic and metal fittings carrying hot or cold water, e.g. industrial and agricultural plastic water pipe systems or drainage systems.

£27.17

EX VAT

Loctite 7649 Anaerobic Activator

LOCTITE SF 7649 is a solvent-based activator for surface preparation that provides for low temperature curing.

£15.51

EX VAT

Permabond A025 High Strength Threadlock

Permabond A025 is an anaerobic adhesive formulated to provide permanent locking and sealing of metal parts such as bearings, gears, studs and other threaded components.

£36.47

EX VAT

Permabond A131 Pipe Sealant

Permabond A131 is an anaerobic adhesive designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water.

£11.98

EX VAT

Permabond A905 Anaerobic Activator

Permabond A905 Surface Activator is designed to allow non-metallic surfaces to be bonded/sealed. It also accelerates the cure rate of anaerobics and improves bonding to contaminated surfaces. It will also allow the adhesive to cure in a larger gap.

£17.34

EX VAT

Anaerobic adhesives, also known as anaerobic threadlockers, are designed to cure in the absence of air and when confined between metal surfaces. These adhesives remain liquid until isolated from oxygen, allowing them to flow into gaps or threads. Once the adhesive is deprived of oxygen, it initiates a chemical reaction, forming a strong and durable bond. Anaerobic adhesives are commonly used to lock and seal threaded fasteners, preventing loosening due to vibrations or disassembly caused by external forces. They provide excellent resistance to chemicals, heat, and impact, making them suitable for various mechanical and automotive applications.