Can’t see what you are looking for?
If you can’t find what you need, please get in touch. Our expert team are ready to help with any questions you might have.
Contact Us
0117 971 1364
sales@thenamethatsticks.com
Aro-Bond® 561 is a medium viscosity single component VAE co-polymer adhesive with good shear stability.
View Product
Aro-Bond® 737 is a hot melt adhesive based on a reactive polyurethane.
Aro-Bond® 791 is a cleaner for machines and equipment where reactive polyurethane hot melt adhesives are used.
Pressen 1409 has been formulated for the self-adhesive requirements of the graphic arts and panel market. In these applications, the pressure sensitive adhesive is applied to a filmic material for direct or indirect lamination.
BAM 418 is ideal for a wide variety of applications where a high speed, very fast setting hot melt adhesive is required. BAM 418 has a versatile temperature performance.
BAMFutura 1 has been proven to be an excellent universal carton and case sealer. It performs well on the slowest case packers and the fastest carton sealers (160 cartons per minute-typical), in both cold winter and hot summer conditions.
BAMFutura 307 represents a new concept in edgebanding hot melts. It is based on the principal that for quality woodworking operations, adhesives should be clean and easy to handle, in addition to being odourless and non fuming.
Pressen 1525 is a full pressure sensitive adhesive, which exhibits excellent resistance to high and low temperatures. Pressen 1525 combines high levels of tack, shear and peel.
Pressen 1525 has been formulated to bond most plastics, metals, ceramics and woods.
Pressen 1725A is a high performance hot melt pressure sensitive adhesive formulated for multi-purpose self-adhesive tapes. It is also suitable for use in the manufacture of bags with self-adhesive closure strips.
Pressen 961 is a peelable pressure sensitive hot melt. The adhesive has been formulated to be non migrating, and remain upon the surface it was applied to. Pressen 961 is clear in colour, allowing use on clear films.
Pressen 961 has been formulated to use as an adhesive for resealable poly bags where a differential resealable bond is required.
TEROSON MS 939 is a 1-part, low modulus, flexible, odourless modified silane polymer adhesive used for elastic sealing and cures to an elastomeric thermoset product.
Artificial grass pins are used for pinning artificial grass or geotextile to the ground, ensuring the turf or textile will not move during the installation.
LOCTITE 406 is a low viscosity, fast curing instant adhesive that is ideal for bonding plastics and elastomeric materials where very fast fixturing is required.
LOCTITE SI 5331 is designed for the locking and sealing of plastic and metal fittings carrying hot or cold water, e.g. industrial and agricultural plastic water pipe systems or drainage systems.
LOCTITE 55 is designed for sealing of metal and plastic pipes and fittings. It needs no cure time and results in an immediate, full pressure seal. The product has approval for gas and potable water and is certified to NSF/ANSI, Standard 61.
Loctite F241 is a 2 part -'no-mix' adhesive which cures rapidly at room temperature. Its exceptional resistance to peel, fatigue and impact loads on a wide variety of surfaces, make it ideal for applications demanding structural integrity.
LOCTITE SF 7649 is a solvent-based activator for surface preparation that provides for low temperature curing.
The Loctite 218290 is a applicator repair kit for use with adhesive dispensing equipment.
PERMABOND 102 is a low viscosity general purpose cyanoacrylate adhesive suitable for bonding close-fitting components. It is fast setting and suitable for use on plastics, rubber and metals.
Adtech® 1914 silicone oil (WRAS) is a dimethicane fluid which has a very low order of toxicity and if handled with reasonable care present negligible skin irritation problems.
Antistikk is a specially formulated non-hazardous release agent coating which can be applied to any equipment which will be in contact with adhesive.
Everflex Contract 225 Industrial & Glazing Silicone is a mid modulus acetoxy cure silicone sealant that adheres to most smooth and non-porous substrates. Typically used for single glazing, draught-proofing and general industrial use. Contains a power
Gun Grade Expanding Foam is a quick setting polyurethane-based foam which expands greatly on application and yields up to 50 times original can contents. It fills irregular gaps, fixes framework, insulates and sound deadens.
The Topcutter 2000 has been developed for quick and efficient cutting of seams on the artificial grass in preparation for bonding. The guides of the Topcutter 2000 can easily be adjusted to the width of the artificial grass bac...
Page 12 of 17
Got an adhesives problem? Let our sticky smarts work for you.
Call us0117 971 1364
Email ussales@thenamethatsticks.com
Get how-to advice, industry news and new innovations — straight to your inbox.