The Aro-Bond plastic glue disposable spreader makes spreading glue easy and efficient, with an even spread of glue.
BAM 997 can be used for edgebanding, softforming and precoating. BAM 997 is suitable for use on most types of edgebander e.g. Homag IMA.
Forbond 400 is a high single component polyurethane sealant, with high modulus for a wide range of sealing and bonding applications.
Henkel Technomelt PUR 270/7 G is a universal polyurethane-based hotmelt adhesive. It is ideally suited for waterproof bonding of all standard edging materials. The granular hotmelt adhesive can be used on all standard machines without retooling.
Edge banding hotmelt based on EVA in granular shape for automatic edge banding machines.
The Henko 655B is designed for rolling and unrolling roles of artificial grass. This sturdy device is very easy to use, and allows to cut precise pieces of grass of the roll. Afterwards it can be rolled up tightly and neatly again.
Klebo KG150 provides clean, quick application of solvent-based contact adhesives. It comes with a double-edged serrated application comb which is suitable for smooth, coarse, uneven, or absorbent surfaces.
Hot melt adhesive for profile wrapping.
LOCTITE SF 7063 is a general-purpose product for cleaning and degreasing any kind of surface or machinery component before proceeding with a repair or assembly job. It is a solvent-based cleaner and the product leaves no residue.
LOCTITE AA F246 is a 2-part ''no-mix'' structural acrylic adhesive which cures rapidly at room temperature.
PERMABOND 4C20 is an intermediate viscosity, medical device grade, cyanoacrylate that is used to bond through intermediate gaps. It is fast setting and suitable for use on plastics, rubber and metals.
Permabond A025 is an anaerobic adhesive formulated to provide permanent locking and sealing of metal parts such as bearings, gears, studs and other threaded components.
Permabond A131 is an anaerobic adhesive designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water.
Permabond A905 Surface Activator is designed to allow non-metallic surfaces to be bonded/sealed. It also accelerates the cure rate of anaerobics and improves bonding to contaminated surfaces. It will also allow the adhesive to cure in a larger gap.
PERMABOND C910 is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts.
Permabond C Surface Activator (CSA) is used in conjunction with Permabond cyanoacrylate adhesives to promote a fastercure and to extend their gap-filling capabilities.
PERMABOND ES562 is a single-part epoxy adhesive which flows like solder when heated during curing. The adhesive has excellent adhesion to metal surfaces and composites.
PERMABOND ES566 is a single-part epoxy adhesive which has excellent adhesion to metal surfaces, composites and difficult to bond plastics (such as Nylon, PBT etc.).
PERMABOND ET5441 is a thermally conductive two-component adhesive based on epoxy resin. It is specifically designed to bond metal substrates when excellent resistance to high temperature is required.
PERMABOND ET5429 is a thixotropic two-part adhesive with excellent resistance to impact and vibration. The controlled flow properties enables the adhesive to be used where gap filling or vertical application is required.
Permabond Initiator 41 is used in conjunction with Permabond TA(structural acrylic) adhesives as a no-mix resin and initiator system. Its solvent free formulation allows a long open time if required.
PERMABOND TA437 is a single component structural acrylic adhesive designed primarily for bonding metals, ferrites and ceramics. The typical fixture time of TA437 when used with Initiator 41 is 20-30 seconds
PERMABOND TA4610 is a 2-part, 1:1 toughened acrylic adhesive. It has been developed to bond low surface energy plastics such as polypropylene and polyethylene with no primer or surface treatment required.
PERMABOND UV6302 is a single part, fast setting, and UV curable adhesive designed specifically for bonding plastics. This material has excellent adhesion to a variety of plastics including polycarbonate.