Ureka Global Ltd
(formerly Alansons Industries Ltd)
7 Flowers Hill
+44 (0)117 971 1364
Adtech® 1006 is a solvent-based activator formulated to improve the curing process of Adtech® anaerobic adhesives.
Loxeal Olio 1000 silicone oil (WRAS approved) is a dimethicane fluid which has a very low order of toxicity and if handled with reasonable care present negligible skin irritation problems.
Adtech® 470 is a low viscosity, clear weld cement for bonding acrylic to itself and to other substrates.
Cleaning solvent specifically designed for cleaning and surface preparation in severe pollution. Excellent solvent for oils, greases , also effective for removing inks.
A Hand Brush version of the triangle brush system. Available with the yellow brush fibres. It is specifically designed for brushing smaller areas of synthetic grass such as landscaping applications.
Spare gun case for the multiiiibead dispensing guns.
AEC T732 polypropylene primer, is a one component primer that primarily increases the adhesion of adhesives in combination with plastics.
The Henko 900 Spreader is designed for spreading sand on grass during installation. The motor driven machine spreads the sand evenly across the grass surface and the coverage rate can be adjusted by the regulator on the handle bar.
Aro-Bond® 790 is glue thread which is used to stitch veneers prior to bonding. Compatible with Kuper stitching machines.
The Henko 655 is designed for rolling and unrolling roles of artificial grass. This sturdy device is very easy to use, and allows to cut precise pieces of grass of the roll. Afterwards it can be rolled up tightly and neatly again.
Adtech® 4030 is a high viscosity, low odour and low bloom cyanoacrylate adhesive.
Adtech 6508 is designed for the sealing and locking of metal fittings and pipes. Adtech 6508 is a single component anerobic, medium strength thixotropic, acrylic based product.
Adtech 6606 is designed for the bonding of cylindrical parts particularly where disassembly is required for servicing. Adtech 6606 cures when confined in the absence of air between close fitting metal surfaces.
Alpha S889 is a high viscosity, multi-purpose adhesive solution that has been formulated to bond such materials as natural andsynthetic rubber extrusions (including high styrene rubbers), PVC coated felts, upholstery fabrics and fibreglass to metal..
Apollo Marine (A3701 A/B) allows you to securely bond and safely repair PVC inflatable products, including boats and lifesaving equipment. It is a two-component contact type polyurethane adhesive (2K PU)
Apollo Construction (A5196 A/B) is a general purpose, water-resistant, gap-filling adhesive that allows you to securely bond a wide range of construction materials in both interior and exterior applications.
Apollo (A66) has been specifically developed for coating a wide range of foams to guard against liquid ingress, includingwater, oil and chemicals. It is a sprayable PVC coating that offers the manufacturer many benefits.
Apollo (A8489) is a multi-purpose, non-flammable contact adhesive, suitable for bonding a wide range of internal and external applications, including foam conversion, wood jointing, shop-fitting, furniture manufacture, building and construction.
BAM 997 can be used for edgebanding, softforming and precoating. BAM 997 is suitable for use on most types of edgebander e.g. Homag IMA.
Forbond 400 is a high single component polyurethane sealant, with high modulus for a wide range of sealing and bonding applications.
Henkel Technomelt PUR 270/7 G is a universal polyurethane-based hotmelt adhesive. It is ideally suited for waterproof bonding of all standard edging materials. The granular hotmelt adhesive can be used on all standard machines without retooling.
Edge banding hotmelt based on EVA in granular shape for automatic edge banding machines.
The Henko 609 Infill Rake is designed for spreading out the various types of infill material, e.g. sand, SBR, TPE, etc. Each finger on the rake is spring loaded and can be independently adjusted, ensuring equal loading on all fingers.