Ureka Global Ltd
(formerly Alansons Industries Ltd)
7 Flowers Hill
+44 (0)117 971 1364
The Henko 603 Grass Splitter has two purposes; splitting the grass fibres out of the glue and adding pressure to the joint.
Henko H700 is a one-component polyurethane adhesive for bonding artificial grass in both wet and dry conditions.
Prefere 5600 is a medium speed curing ''summer'' powder hardener which is mixed with Prefere 4152 and can be used for many wood bonding applications in the furniture and woodworking industry, including veneering, laminating and jointing applications.
Tesa 7133 Veneer Tape is a self-adhesive tape which leaves no residue on the veneer surface after hot pressing.
BAM Futura 308 represents a new concept in edgebanding hot melts, based on the principal that for quality woodworking operations, adhesives should be clean and easy to handle, odourless and not fume.
The Turf Grip pull clamp is ideal for moving artificial turf. The teeth and the ergonomic handle make it possible to apply a lot of force without much effort.
Aro-Bond® 680 is a fast drying spray applied contact adhesive based on polychloroprene rubbers and gives a long open time.
Aro-bond® 695 is a high solids, non-flammable, low pressure sprayable, synthetic rubber based adhesive designed primarily for applications in the foam conversion, upholstery, furniture and insulation industry.
• Fast drying
• High heat resistance
• Aggressive tack
Aro-Bond® 930 is an all purpose, one component, water proof, D4 MCPU gel adhesive. 30 minute cure speed.
Speed. Precision. Safety. A must have piece of kit for any artificial grass installer. The Henko 604 Length Knife can be used to cut incredibly straight lines very quickly on overlapping joints.
Replacement Grey Rubber Roller for use with Pfohl Adhesive Rollers
Cladstikk® 12 is a solvent and water free MS Polymer adhesive which when used with the multiiiibead gun gives a fast, efficient and clean bonding system ideal for bonding large surfaces like PVC and GRP hygienic wall cladding.
Prefere 5219 filled, liquid hardener is used in conjunction with Prefere 4114 resin, to give a liquid-liquid, veneering and laminating resin system.
Adtech® 836 Methyl Methacrylate Adhesive has been designed to bond low surface energy materials such as polyproylene (PP) polyethylene (PE).
Adtech® 9295 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications.
Aro-Bond® 925 is a two component polyurethane, general purpose, water resistant, gap filling adhesive suitable for bonding a wide range of construction materials in both interior and exterior applications.
Anti-Stick is a special wax designed to prevent adhesives from sticking to the glue box and other tools.
Pfohl Adhesive Spreaders are the benchmark in the industry for applying adhesive to panels. Available in 75mm (GL75), 150mm (GL150) and 200mm (GL200) widths
Prefere 5912 is a powder filler and extender which is added to mixes of Prefere 4152 and powder hardener to counteract adhesive penetration through the decorative veneers.
Cladstikk® 19 is a solvent and water free adhesive which when used with the multiiiibead gun gives a fast, efficient and clean bonding system ideal for bonding large surfaces like PVC and GRP hygienic wall cladding.
Cladstikk® 25 is a two part polyurethane based adhesive designed for bonding many types of substrates including GRP and PVC wall cladding panels.
• Fast curing
• Good gap fill
• VOC free
• Ready to mix pack sizes
The multiiiimix nozzle is ideal for use with two component adhesives such as epoxy, polyurethane and methyl methacrylate
Prefere 4535 is a clear liquid melamine-urea resin adhesive, which is used with liquid hardener Prefere 5035 to give a fully weatherproof and structural bond.