Showing results for Fabric
Gekko G52 canister system is designed for bonding a variety of substrates to subfloors. G52 is ideal for bonding PVC hygienic wall cladding in vertical installations, and has an excellent temperature resistance of 115C.
Aro-Bond® 621 is a fast drying spray applied contact adhesive applied from a self contained canister through a spray gun.
Aro-Bond® 680 is a fast drying spray applied contact adhesive based on polychloroprene rubbers and gives a long open time.
Aro-bond® 695 is a high solids, non-flammable, low pressure sprayable, synthetic rubber based adhesive designed primarily for applications in the foam conversion, upholstery, furniture and insulation industry.
• Fast drying
• High heat resistance
• Aggressive tack
High strength grade hot melt adhesive designed for non-smooth or harder surfaces. Use for laying carpets or displaying tiles in shopping outlets etc.
SOLVENT FREE, ultra-strong gap filling grab adhesive with Soudal's unique Reinforced Bonding Technology. High initial grab - 300kg/m2. Very high final bond strength. Compatitble with most building materials, but especially effective on porous surface
3M 77 Multipurpose Spray Adhesive is an extremely versatile, fast-drying, and transparent spray adhesive that bonds a wide range of lightweight materials.
Aerotak is a heavy duty aerosol adhesive which gives an exceptionally strong bond for a wide range of demanding uses.
3M 1000NF Fast Tack Water Based Adhesive is a unique, water-based adhesive specially designed to deliver an effective combination of fast, heat resistant bonding, repositionability and high ultimate strength.
Adtech® 4545 is a thixotropic, gel consistency, high performance cyanoacrylate adhesive.
Gekko G10 Contact Adhesive is designed for bonding a variety of substrates to subfloors. G10 is unique in that it is non-flammable, and non-chlorinated, providing a significantly safer alternative to other spray canister contact adhesives.
Gekko G53 is a high performance contact adhesive specifically designed for bonding rubber floor coverings, including marmoleum. G53 is also IMO ''Wheelmark'' approved so can be used in many applications in the marine industry.
Apollo (A8513) is a non-flammable, low-pressure, sprayable, synthetic rubber-based primer. It is designed primarily for priming polyurethane foams prior to the application of adhesive tapes and films etc.
Apollo A78 has been specifically formulated for use with furniture and seating applications, including the construction of aircraft seating, office seating and flocking applications.
Apollo Construction (A8410) is a spray applied contact adhesive which has been specifically developed for the economical and efficient manufacture of wrap insulation products, including pipe lagging.
Apollo A7625 has been specifically developed for applications within the transport industry, including aircraft seats, car interiors, panel bonding and other applications where flame retardancy is essential.
TensorGrip F26 is a non-MECL adhesive with exposure reduction benefits for users, along with a highly controllable spray pattern. This web spray contact adhesive has been developed for general foam, fabric and upholstery applications.
TensorGrip F55 is a fast dry, Non-MECL adhesive for high demand for foam, fabric and upholstery applications. This unique formula blends the benefits of non chlorinated technology with fast flash off time for ultimate user safety and efficiency.
Alpha Thixofix contact adhesive has been developed as an easy to use, multi-purpose contact adhesive that exhibits high bonding performance and non-drip properties.
Aro-Bond® 537 is a medium viscosity single component VAE co-polymer adhesive with good shear stability.
Aro-Bond® 561 is a medium viscosity single component VAE co-polymer adhesive with good shear stability.
BAM 418 is ideal for a wide variety of applications where a high speed, very fast setting hot melt adhesive is required. BAM 418 has a versatile temperature performance.
LOCTITE 406 is a low viscosity, fast curing instant adhesive that is ideal for bonding plastics and elastomeric materials where very fast fixturing is required.
3M 924 transfer film tape is an acrylic, reverse wound, pressure sensitive adhesive for applying on a variety of substrate or material combinations
Got an adhesives problem? Let our sticky smarts work for you.
Call us0117 971 1364
Get how-to advice, industry news and new innovations — straight to your inbox.