Ureka | Products

High Performance PU Sealant

Aro-Seal 1132 Polyurethane Adhesive Sealant

Aro-Seal® 1132 is a high performance, one component, high modulus, polyurethane sealant.

View Product

High bond strength on nearly all surfaces
Excellent chemical resistance
Stays elastic after curing
Good colour stability

View Product

High Strength MS Polymer

Formoa 017 FE MS Polymer Adhesive

Formoa 017 is a high quality single component adhesive-sealant with high stiffness and very high adhesive strength. It is based on MS Polymer, chemically neutral and fully elastic.

View Product

High performance mechanical properties
Combines high stiffness with very high bond strength
High green strength, quick build-up of end strength, high sheer strength after full cure
Does not contain isocyanates, silicone, solvent
Flexible elastic rubber -movement accommodation up to 20%
No bubble formation within sealant (in high temperature and humidity applications)
Very easy to tool and finish
Colour stability and UV resistance
Can be painted wet-on-wet in paint trains with most industrial paints
Withstands all climatic conditions

View Product

Pink 'n' green Methacrylate

Adtech 3295 Toughened Acrylic Adhesive

Adtech 3295 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications.

View Product

Fast cure
High strength
High impact resistance
Bonds GRP structures
Bonds dissimilar metals
Dries translucent

View Product

Bonds almost all substrates

Aro-Seal 1101 MS Polymer Adhesive Sealant

Aro-Seal® 1101 is a one component, solvent and water free, elastic construction adhesive based on MS polymers. Aro-Seal 1101 can be used for many construction applications where a strong and flexible bond is required.

View Product

High bond strength on nearly all surfaces
Excellent adhesion to porous surfaces and PVC
No bubble formation within sealant
Good colour stability
Good resistance to UV
Acid, isocyanate and solvent free
Resistance to most chemicals
Overpaintable with all water based paints
Meets requirements of PAS23/24

View Product

5 - 10 minute curing Epoxy

Adtech 9005 Toughened Epoxy

Adtech® 9005 is a fast curing two component structural epoxy adhesive, which cures at room temperature to form a tough, rigid thermoset polymer. Cures in 5 - 10 minutes.

View Product

Fast cure
High strength
High impact resistance
Bonds many substrates
Transparent

View Product

multiiiibead MB07 Spreader Nozzle

The multiiiibead MB07 nozzles are used with cartridge and sachet dispensing guns. They are fast, efficient and clean at dispensing cartridge and sachet style adhesives and sealants when large surfaces need to be bonded.

View Product

Fast application
Optimum coverage
Increases bond strength
Two adaptors to fit either cartridges or sachets
Easy changeover
Disposable

View Product

High Performance Contact Adhesive

Woodstikk HP Contact Adhesive

Woodstikk® HP is a hand applied contact adhesive suitable for a range of internal and external applications.

View Product

Fast drying
Good heat resistance
Long open time
Multiple applications
Weather proof bond

View Product

High grab, fast cure, MS Polymer adhesive

Cladstikk 30 All Purpose MS Polymer Adhesive

Cladstikk® 30 is a fast curing, one component, solvent and water free, elastic construction adhesive based on MS Polymer, ideal for bonding many construction materials including PVC and GRP hygienic wall cladding.

View Product

High bond strength on nearly all surfaces
Fast curing
Interior and exterior use
Can be applied to damp surfaces
Acid, isocyanate and solvent free
Resistant to Chemicals & Petrol (10% dilute acids/alkalis, most solvents)
Overpaintable with all water based paints
Resistance to most chemicals

View Product

30 minute cure PU Gel

Woodstikk PU Gel D4 Polyurethane adhesive

Woodstikk PU Gel is an all purpose, one component, water proof, D4 MCPU gel adhesive. 30 minute cure speed.

View Product

Non-slumping, ready to use, gel
Solvent free
Totally non flammable
Fully waterproof to EN 204 D4
High performance bonds between a wide range of materials
Excellent weathering and aging properties
Foams slightly to fill gaps
Excellent chemical resistance

View Product

5 minute curing PU Gel

Aro-Bond 905 Fast Curing PU Gel Adhesive

Aro-Bond® 905 is a one component, cartridge-loaded, solvent free, fast setting, moisture curing polyurethane, thixotropic gel. Cures in 5 minutes.

View Product

Non-slumping, ready to use, gel
Solvent free
Totally non flammable
Fully waterproof to EN 204 D4
High performance bonds between a wide range of materials
Excellent weathering and aging properties
Foams slightly to fill gaps
Excellent chemical resistance

View Product

For use with multiiiibead guns

multiiiibead Disposable Nozzle

These nozzles are used with the multiiiibead dispensing guns. The multiiiibead gun system are fast, efficient and clean dispensing guns for dispensing MS polymer adhesives when large surfaces need to be bonded, e.g. flooring, cladding, artificial gr

View Product

Three widths: 180mm, 300mm and 400mm
Multiple hole configurations
Easy changeover
Disposable

View Product

5 minute curing PU Gel

Woodstikk PU Rapid Gel D4 Polyurethane Adhesive

Woodstikk® PU Gel D4 is a one component, cartridge-loaded, solvent free, fast setting, moisture curing polyurethane, thixotropic gel. Cures in 5 minutes.

View Product

Non-slumping, ready to use, gel
Solvent free
Totally non flammable
Bonds skirting boards and stair treads
Fully waterproof to EN 204 D4
High performance bonds between a wide range of materials
Excellent weathering and aging properties
Foams slightly to fill gaps
Excellent chemical resistance

View Product

7 - 12 minute cure MMA

Adtech 9300 Toughened Acrylic Adhesive

Adtech® 9300 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications. 7 - 12 minutes cure speed.

View Product

Fast cure
High strength
High impact resistance
Bonds GRP structures
Bonds dissimilar metals

View Product

Fast curing MS Polymer

Aro-Seal 1155 Fast Cure MS Polymer Adhesive Sealant

Aro-Seal® 1155 is a fast curing, one component, high grab, elastic construction adhesive based on MS polymer. Aro-Seal 1155 can be used for many construction applications where a high grab, fast cure adhesive is required.

View Product

High bond strength on nearly all surfaces
Fast curing
Interior and exterior use
Ideal for bonding skirting boards and stair treads
Can be applied to damp surfaces
Acid, isocyanate and solvent free
Resistant to most chemicals and petrol (10% dilute acids/alkalis, most solvents)
Overpaintable with all water based paints

View Product

2K PU for Hygienic Wall Cladding

Cladstikk 25 2K Polyurethane Adhesive

Cladstikk® 25 is a two part polyurethane based adhesive designed for bonding many types of substrates including GRP and PVC wall cladding panels.

View Product

• Fast curing
• Good gap fill
• VOC free
• Ready to mix pack sizes

View Product

Spray Canister Adhesive

Aro-Bond 621 Spray Canister Adhesive

Aro-Bond® 621 is a fast drying spray applied contact adhesive applied from a self contained canister through a spray gun.

View Product

Fast drying
Good heat resistance
Portable
Economic coverage

View Product

Neutral Cure Silicone

Aro-Seal 1162 Neutral Oxime Cure Silicone

Aro-Seal 1162 is a one component professional grade neutral oxime curing silicone sealant used for sealing and flexible jointing in many applications

View Product

Permanently elastic
Weatherproof
Non fading
Suitable for alkaline and metal surfaces
Low odour
Safe to use
Contains additional uPVC adhesion promoters.

View Product

15 - 30 minute cure MMA

Adtech 9310 Toughened Acrylic Adhesive

Adtech® 9310 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications.

View Product

Fast cure
High strength
High impact resistance
Bonds GRP structures
Bonds dissimilar metals

View Product

Superfast Cyanoacrylate (superglue)

Adtech 4060 Superfast Cyanoacrylate

Adtech® 4060 is a medium viscosity superfast cyanoacrylate adhesive. It is designed for the bonding of a wide range of plastics, rubbers and 'difficult polymers'.

View Product

Medium viscosity
Fast curing
Bonds plastics and rubbers
Excellent humidity resistance

View Product

3 sizes available

Pfohl Glue Adhesive Spreader

Pfohl Adhesive Spreaders are the benchmark in the industry for applying adhesive to panels. Available in 75mm (GL75), 150mm (GL150) and 200mm (GL200) widths

View Product

Consistent coverage
Use with PVA, UF, PRF, MUF, and PU adhesives
3 sizes available

View Product

High Performance Contact Adhesive

Aro-Bond 693 High Performance Contact Adhesive

Aro-Bond® 693 is a hand applied contact adhesive suitable for a range of internal and external applications.

View Product

Fast drying
Good heat resistance
Long open time
Multiple applications
Weather proof bond

View Product

Bonds Polyrop and Polyethylene

Adtech 836 Plastic Bonding Acrylic Adhesive

Adtech® 836 Methyl Methacrylate Adhesive has been designed to bond low surface energy materials such as polyproylene (PP) polyethylene (PE).

View Product

Bonds polyolefins & other low surface energy plastics
Adhesion to a wide variety of substrates
Full cure at room temperature
No primer required
Good impact strength
Good chemical resistance

View Product

Spray Neoprene Contact Adhesive

Aro-Bond 680 Spray Contact Adhesive

Aro-Bond® 680 is a fast drying spray applied contact adhesive based on polychloroprene rubbers and gives a long open time.

View Product

Fast drying
Good heat resistance
Long open time
Multiple applications

View Product

Non-Flam Sprayable Contact Adhesive

Aro-Bond 695 NF Spray Contact Adhesive

Aro-bond® 695 is a high solids, non-flammable, low pressure sprayable, synthetic rubber based adhesive designed primarily for applications in the foam conversion, upholstery, furniture and insulation industry.

View Product

• Non-flammable
• Fast drying
• High heat resistance
• Aggressive tack

View Product

Products

Aro-Seal 1132 Polyurethane Adhesive Sealant

Formoa 017 FE MS Polymer Adhesive

Adtech 3295 Toughened Acrylic Adhesive

Aro-Seal 1101 MS Polymer Adhesive Sealant

Adtech 9005 Toughened Epoxy

multiiiibead MB07 Spreader Nozzle

Woodstikk HP Contact Adhesive

Cladstikk 30 All Purpose MS Polymer Adhesive

Woodstikk PU Gel D4 Polyurethane adhesive

Aro-Bond 905 Fast Curing PU Gel Adhesive

multiiiibead Disposable Nozzle

Woodstikk PU Rapid Gel D4 Polyurethane Adhesive

Adtech 9300 Toughened Acrylic Adhesive

Aro-Seal 1155 Fast Cure MS Polymer Adhesive Sealant

Cladstikk 25 2K Polyurethane Adhesive

Aro-Bond 621 Spray Canister Adhesive

Aro-Seal 1162 Neutral Oxime Cure Silicone

Adtech 9310 Toughened Acrylic Adhesive

Adtech 4060 Superfast Cyanoacrylate

Pfohl Glue Adhesive Spreader

Aro-Bond 693 High Performance Contact Adhesive

Adtech 836 Plastic Bonding Acrylic Adhesive

Aro-Bond 680 Spray Contact Adhesive

Aro-Bond 695 NF Spray Contact Adhesive

Let’s get stuck in.