Ureka | Products

Contact adhesive for carpet and wall cladding

Gekko G52 High Performance Contact Adhesive

Gekko G52 canister system is designed for bonding a variety of substrates to subfloors. G52 is ideal for bonding PVC hygienic wall cladding in vertical installations, and has an excellent temperature resistance of 115C.

View Product

CO-REZ Technology™ results in an increase of up to 15% extra surface coverage.
Ideal for the vertical installation of hygienic wall cladding.
Fast drying with a long open time.
Good temperature resistance of up to 115°C.

View Product

High Performance PU Sealant

Aro-Seal 1132 Polyurethane Adhesive Sealant

Aro-Seal® 1132 is a high performance, one component, high modulus, polyurethane sealant.

View Product

High bond strength on nearly all surfaces
Excellent chemical resistance
Stays elastic after curing
Good colour stability

View Product

Bonds almost all substrates

Aro-Seal 1101 MS Polymer Adhesive Sealant

Aro-Seal® 1101 is a one component, solvent and water free, elastic construction adhesive based on MS polymers. Aro-Seal 1101 can be used for many construction applications where a strong and flexible bond is required.

View Product

High bond strength on nearly all surfaces
Excellent adhesion to porous surfaces and PVC
No bubble formation within sealant
Good colour stability
Good resistance to UV
Acid, isocyanate and solvent free
Resistance to most chemicals
Overpaintable with all water based paints
Meets requirements of PAS23/24

View Product

5 - 10 minute curing Epoxy

Adtech 9005 Toughened Epoxy

Adtech® 9005 is a fast curing two component structural epoxy adhesive, which cures at room temperature to form a tough, rigid thermoset polymer. Cures in 5 - 10 minutes.

View Product

Fast cure
High strength
High impact resistance
Bonds many substrates
Transparent

View Product

Hand applied wood floor adhesive

Woodstikk 19 MS Polymer Wood Flooring Adhesive

Woodstikk 19 is an MS Polymer adhesive used for bonding wood flooring, wood blocks, parquet flooring, engineered wood flooring

View Product

Hybrid polymer based
Solvent free
Water free
Free from isocyanates
Easy to apply
Remains permanently elastic
High final bond strength
Compatible with underfloor heating

View Product

Best Seller Veneering & Laminating Resin

Prefere 4152 Urea Veneering and Laminating Resin

The Prefere 4152 is the best seller for all veneering and laminating work. Whether it is cold press, hot press or form pressing the liquid/powder combination is the most versatile resin system for any workshop.

View Product

Meets requirements of BS1203 (type MR)
Water resistant
Can be hot or cold cured
Cures with radio frequency equipment

View Product

All purpose D3 PVA, RF curable.

Woodstikk D3 PVA Woodworking Adhesive

Woodstikk® D3 PVA is an all purpose, assembly grade, single component waterbased PVA adhesive compliant with EN 204/205 D3 requirements.

View Product

Excellent water resistance – EN204 D3
Cures with radio frequency equipment

View Product

Fire resistant and fully waterproof

Woodstikk PRF Structural Weatherproof Adhesive

Woodstikk PRF can be used for bonding glulam beams, teak and iroko garden furniture, wooden boat applications etc

View Product

High level of water and heat resistance
Bonds wood, modified or densified woods (including Accoya), mineral fibre reinforced boards, brick, concrete and unglazed porcelain
Bonds industrial and decorative laminated plastics (phenolic resin based or phenolic resin backed)
Bonds with radio frequency equipment

View Product

multiiiibead MB07 Spreader Nozzle

The multiiiibead MB07 nozzles are used with cartridge and sachet dispensing guns. They are fast, efficient and clean at dispensing cartridge and sachet style adhesives and sealants when large surfaces need to be bonded.

View Product

Fast application
Optimum coverage
Increases bond strength
Two adaptors to fit either cartridges or sachets
Easy changeover
Disposable

View Product

Veneering/laminating kit, fast cure, winter grade

Woodstikk UF Veneering Adhesive - Fast Curing Winter Grade

Woodstikk® UF Veneering Adhesive Systems can be used for all veneering and laminating work. The Fast Curing Winter grade is ideal for colder environments or for a faster cure time requirement.

View Product

Water resistant
Can be hot or cold cured
Cures with radio frequency equipment
Ideal for use in vacuum presses

View Product

5 minute cure PU

Aro-Bond 947 MCPU Adhesive

Aro-Bond® 947 is a single component moisture curing polyurethane D4 wood adhesive with excellent water resistant characteristics. Bonds accoya.

View Product

Excellent water resistance - EN 204 D4
Quick curing
Excellent bond strength on hard and soft woods
Bonds many substrates including non-porous substrates
Bonds Accoya

View Product

Powder one shot adhesive

Woodstikk UF One Shot Powder Adhesive

Woodstikk® One Shot is a one-component urea powder adhesive, which only requires mixing with water to make it ready for use. Used for many woodworking applications including veneering, laminating and assembly.

View Product

Meets requirements of EN12765 Class C3
Good water resistance
Quick curing
Very strong bond
Can be mixed in small batches

View Product

Veneering/laminating kit, slow cure, summer grade

Woodstikk UF Veneering Adhesive - Slow Curing Summer Grade

Woodstikk® UF Veneering Adhesive Systems can be used for all veneering and laminating work. The Slow Curing Summer Grade is ideal for warmer environments or for a slower cure time requirement.

View Product

Meets requirements of BS1203 (type MR)
Water resistant
Can be hot or cold cured
Cures with radio frequency equipment
Ideal for use in vacuum presses

View Product

Bonds clear. Weatherproof bond.

Woodstikk MUF Structural Weatherproof Adhesive

Woodstikk MUF can be used for bonding glulam beams, teak and iroko garden furniture, wooden boat applications etc

View Product

Cures to give an opaque glueline.
Meets requirements of EN301 and EN302 Type I
High bond strength
Water resistant
Can be hot or cold cured
Cures with radio frequency equipment

View Product

High grab, fast cure, MS Polymer adhesive

Cladstikk 30 All Purpose MS Polymer Adhesive

Cladstikk® 30 is a fast curing, one component, solvent and water free, elastic construction adhesive based on MS Polymer, ideal for bonding many construction materials including PVC and GRP hygienic wall cladding.

View Product

High bond strength on nearly all surfaces
Fast curing
Interior and exterior use
Can be applied to damp surfaces
Acid, isocyanate and solvent free
Resistant to Chemicals & Petrol (10% dilute acids/alkalis, most solvents)
Overpaintable with all water based paints
Resistance to most chemicals

View Product

20 minute cure PU

Woodstikk PU D4 Polyurethane Adhesive

Woodstikk® PU D4 is a single component moisture curing polyurethane wood adheisve with excellent water resistant characteristics.

View Product

Excellent water resistance - EN 204 D4
Quick curing
Excellent bond strength on hard and soft woods
Bonds many substrates including non-porous substrates

View Product

Woodstikk Adhesive Colour Additive

Woodstikk® Adhesive Colour Additive is a dye (pigment) which is added to adhesives and resins to reduce the visibility of the glueline

View Product

Reduces visible glueline
Water based
Available in 3 colours shades

View Product

D4 Water Proof PVA

Woodstikk D4 PVA Woodworking Adhesive

Woodstikk® D4 PVA Adhesive is a water proof, high performance, single component, D4 grade, wood adhesive.

View Product

Excellent water resistance - EN204 D4
Excellent bond strength - EN 14257 (WATT 91)
Excellent creep resistance - EN 14256
Quick curing
Excellent bond strength on hard and soft woods
Cures with radio frequency equipment

View Product

5 minute cure PU

Woodstikk PU Rapid D4 Polyurethane Adhesive

Woodstikk® PU Rapid D4 is a single component moisture curing polyurethane wood adhesive with excellent water resistant characteristics.

View Product

Excellent water resistance - EN 204 D4
Quick curing
Excellent bond strength on hard and soft woods
Bonds many substrates including non-porous substrates

View Product

High Performance Contact Adhesive

Woodstikk HP Contact Adhesive

Woodstikk® HP is a hand applied contact adhesive suitable for a range of internal and external applications.

View Product

Fast drying
Good heat resistance
Long open time
Multiple applications
Weather proof bond

View Product

Veneering hot press bonding, all day pot life

Woodstikk UF Veneering Adhesive - Hot Press Bonding Grade

Woodstikk® UF Veneering Adhesive Systems can be used for all veneering and laminating work. The Hot Press Bonding Grade is ideal for use with hot platen presses and gives and all day pot life.

View Product

Meets requirements of BS1203 (type MR)
Water resistant
Filler hardener - reduces bleed through
Ideal for hot press bonding
All day pot life

View Product

20 minute cure PU

Aro-Bond 920 MCPU Adhesive

Aro-Bond® 920 is a single component moisture curing polyurethane D4 wood adhesive with excellent water resistant characteristics.

View Product

Excellent water resistance - EN 204 D4
Quick curing
Excellent bond strength on hard and soft woods
Bonds many substrates including non-porous substrates
Bonds Accoya

View Product

Filler to reduce bleed through

Woodstikk UF Filler Extender

Woodstikk UF Filler Extender is a powder filler and extender which is added to mixes of Woodstikk UF Adhesive Systems to counteract adhesive penetration through the decorative veneers.

View Product

Counteracts adhesive penetration through veneers
Meets requirements of EN301 and EN302 Type I
High bond strength
Water resistant
Can be hot or cold cured
Cures with radio frequency equipment

View Product

5 minute curing PU Gel

Aro-Bond 905 Fast Curing PU Gel Adhesive

Aro-Bond® 905 is a one component, cartridge-loaded, solvent free, fast setting, moisture curing polyurethane, thixotropic gel. Cures in 5 minutes.

View Product

Non-slumping, ready to use, gel
Solvent free
Totally non flammable
Fully waterproof to EN 204 D4
High performance bonds between a wide range of materials
Excellent weathering and aging properties
Foams slightly to fill gaps
Excellent chemical resistance

View Product

Products

Gekko G52 High Performance Contact Adhesive

Aro-Seal 1132 Polyurethane Adhesive Sealant

Aro-Seal 1101 MS Polymer Adhesive Sealant

Adtech 9005 Toughened Epoxy

Woodstikk 19 MS Polymer Wood Flooring Adhesive

Prefere 4152 Urea Veneering and Laminating Resin

Woodstikk D3 PVA Woodworking Adhesive

Woodstikk PRF Structural Weatherproof Adhesive

multiiiibead MB07 Spreader Nozzle

Woodstikk UF Veneering Adhesive - Fast Curing Winter Grade

Aro-Bond 947 MCPU Adhesive

Woodstikk UF One Shot Powder Adhesive

Woodstikk UF Veneering Adhesive - Slow Curing Summer Grade

Woodstikk MUF Structural Weatherproof Adhesive

Cladstikk 30 All Purpose MS Polymer Adhesive

Woodstikk PU D4 Polyurethane Adhesive

Woodstikk Adhesive Colour Additive

Woodstikk D4 PVA Woodworking Adhesive

Woodstikk PU Rapid D4 Polyurethane Adhesive

Woodstikk HP Contact Adhesive

Woodstikk UF Veneering Adhesive - Hot Press Bonding Grade

Aro-Bond 920 MCPU Adhesive

Woodstikk UF Filler Extender

Aro-Bond 905 Fast Curing PU Gel Adhesive

Let’s get stuck in.