Ureka | Products

Aro-Seal 1101 MS Polymer Adhesive Sealant

Aro-Seal® 1101 is a one component, solvent and water free, elastic construction adhesive based on MS polymers. Aro-Seal 1101 can be used for many construction applications where a strong and flexible bond is required.

View Product

High bond strength on nearly all surfaces
Excellent adhesion to porous surfaces and PVC
No bubble formation within sealant
Good colour stability
Good resistance to UV
Acid, isocyanate and solvent free
Resistance to most chemicals
Overpaintable with all water based paints
Meets requirements of PAS23/24

View Product

Contact adhesive for carpet and wall cladding

Gekko G52 High Performance Contact Adhesive

Gekko G52 canister system is designed for bonding a variety of substrates to subfloors. G52 is ideal for bonding PVC hygienic wall cladding in vertical installations, and has an excellent temperature resistance of 115C.

View Product

CO-REZ Technology™ results in an increase of up to 15% extra surface coverage.
Ideal for the vertical installation of hygienic wall cladding.
Fast drying with a long open time.
Good temperature resistance of up to 115°C.

View Product

High Performance PU Sealant

Aro-Seal 1132 Polyurethane Adhesive Sealant

Aro-Seal® 1132 is a high performance, one component, high modulus, polyurethane sealant.

View Product

High bond strength on nearly all surfaces
Excellent chemical resistance
Stays elastic after curing
Good colour stability

View Product

30 minute cure PU Gel

Woodstikk PU Gel D4 Polyurethane adhesive

Woodstikk PU Gel is an all purpose, one component, water proof, D4 MCPU gel adhesive. 30 minute cure speed.

View Product

Non-slumping, ready to use, gel
Solvent free
Totally non flammable
Fully waterproof to EN 204 D4
High performance bonds between a wide range of materials
Excellent weathering and aging properties
Foams slightly to fill gaps
Excellent chemical resistance

View Product

multiiiibead MB07 Spreader Nozzle

The multiiiibead MB07 nozzles are used with cartridge and sachet dispensing guns. They are fast, efficient and clean at dispensing cartridge and sachet style adhesives and sealants when large surfaces need to be bonded.

View Product

Fast application
Optimum coverage
Increases bond strength
Two adaptors to fit either cartridges or sachets
Easy changeover
Disposable

View Product

All purpose PU Sealant

Aro-Seal 1130 All Purpose PU Sealant

Aro-Seal® 1130 is a one component high modulus, polyurethane sealant.

View Product

High bond strength on nearly all surfaces
Excellent chemical resistance
Stays elastic after curing
Good colour stability

View Product

High grab, fast cure, MS Polymer adhesive

Cladstikk 30 All Purpose MS Polymer Adhesive

Cladstikk® 30 is a fast curing, one component, solvent and water free, elastic construction adhesive based on MS Polymer, ideal for bonding many construction materials including PVC and GRP hygienic wall cladding.

View Product

High bond strength on nearly all surfaces
Fast curing
Interior and exterior use
Can be applied to damp surfaces
Acid, isocyanate and solvent free
Resistant to Chemicals & Petrol (10% dilute acids/alkalis, most solvents)
Overpaintable with all water based paints
Resistance to most chemicals

View Product

For use with multiiiibead guns

multiiiibead Disposable Nozzle

These nozzles are used with the multiiiibead dispensing guns. The multiiiibead gun system are fast, efficient and clean dispensing guns for dispensing MS polymer adhesives when large surfaces need to be bonded, e.g. flooring, cladding, artificial gr

View Product

Three widths: 180mm, 300mm and 400mm
Multiple hole configurations
Easy changeover
Disposable

View Product

Fast curing MS Polymer

Aro-Seal 1155 Fast Cure MS Polymer Adhesive Sealant

Aro-Seal® 1155 is a fast curing, one component, high grab, elastic construction adhesive based on MS polymer. Aro-Seal 1155 can be used for many construction applications where a high grab, fast cure adhesive is required.

View Product

High bond strength on nearly all surfaces
Fast curing
Interior and exterior use
Ideal for bonding skirting boards and stair treads
Can be applied to damp surfaces
Acid, isocyanate and solvent free
Resistant to most chemicals and petrol (10% dilute acids/alkalis, most solvents)
Overpaintable with all water based paints

View Product

5 minute curing PU Gel

Aro-Bond 905 Fast Curing PU Gel Adhesive

Aro-Bond® 905 is a one component, cartridge-loaded, solvent free, fast setting, moisture curing polyurethane, thixotropic gel. Cures in 5 minutes.

View Product

Non-slumping, ready to use, gel
Solvent free
Totally non flammable
Fully waterproof to EN 204 D4
High performance bonds between a wide range of materials
Excellent weathering and aging properties
Foams slightly to fill gaps
Excellent chemical resistance

View Product

2K PU for Hygienic Wall Cladding

Cladstikk 25 2K Polyurethane Adhesive

Cladstikk® 25 is a two part polyurethane based adhesive designed for bonding many types of substrates including GRP and PVC wall cladding panels.

View Product

• Fast curing
• Good gap fill
• VOC free
• Ready to mix pack sizes

View Product

Spray Canister Adhesive

Aro-Bond 621 Spray Canister Adhesive

Aro-Bond® 621 is a fast drying spray applied contact adhesive applied from a self contained canister through a spray gun.

View Product

Fast drying
Good heat resistance
Portable
Economic coverage

View Product

High Performance Contact Adhesive

Aro-Bond 693 High Performance Contact Adhesive

Aro-Bond® 693 is a hand applied contact adhesive suitable for a range of internal and external applications.

View Product

Fast drying
Good heat resistance
Long open time
Multiple applications
Weather proof bond

View Product

Gun for dispensing 1.5ltr and 3ltr smartfoils

multiiiibead Smart Adhesive Dispensing Gun System

The multiiiibead Dispenser Gun is part of the Smart Adhesive Application System and is a battery operated tool used for fast, efficient and clean dispensing of 1.5ltr and 3ltr sachets such as Woodstikk 10, Turfstikk MS210, and Cladstikk 12.

View Product

Faster adhesive application
Increases coverage by as much as 25%
Clean hands and workspace
Ergonomic design
Reduces fatigue
Significantly reduces waste
Boosts productivity by as much as 30%
Portable

View Product

Neutral Cure Silicone

Aro-Seal 1162 Neutral Oxime Cure Silicone

Aro-Seal 1162 is a one component professional grade neutral oxime curing silicone sealant used for sealing and flexible jointing in many applications

View Product

Permanently elastic
Weatherproof
Non fading
Suitable for alkaline and metal surfaces
Low odour
Safe to use
Contains additional uPVC adhesion promoters.

View Product

Bonds many substrates, waterproof, high strength

Aro-Bond 925 Two Component High Performance Polyurethane Adhesive

Aro-Bond® 925 is a two component polyurethane, general purpose, water resistant, gap filling adhesive suitable for bonding a wide range of construction materials in both interior and exterior applications.

View Product

Tough resilient bond
Resistant to water, solvents and heat
Ideal for gap filling bonds

View Product

High Performance Laminate Contact Adhesive

Tensorgrip L17 Hi-Temp Resistant Web Spray Contact Adhesive

TensorGrip L17 is a high performance contact adhesive with a unique resin formula which creates a tough and resilient bond line between decorative surface materials and all common wood substrates.

View Product

Fast Drying.
IMO "WHEELMARK" approved - Certificate number: 164.112/1121/WCL MER0522
High Temp Resistance - 120°C.
Class-1 Fire Rating.
BS 6222 Bond Strength Approval.

View Product

2K PU for Hygienic Wall Cladding

Aro-Bond 965 Two Component Polyurethane Adhesive

Aro-Bond® 965 is a two part polyurethane based adhesive designed for bonding many types of substrates including GRP and PVC wall cladding panels.

View Product

Fast curing
Good gap fill
VOC free
Ready to mix pack sizes

View Product

Fast acting cleaning solvent

Gekko G93 Aerosol Cleaner

Gekko Aerosol Cleaner is a biodegradable, citrus solvent cleaner, degreaser and adhesive remover. It can be used safely on most surfaces and substrates, including painted surfaces, glass, porcelain, concrete.

View Product

Biodegradable.
Compatible with most plastics.
Citrus scent.
Increased productivity.
Fast application.
Minimises waste.

View Product

30 minute cure PU Gel

Aro-Bond 930 D4 PU Gel Adhesive

Aro-Bond® 930 is an all purpose, one component, water proof, D4 MCPU gel adhesive. 30 minute cure speed.

View Product

Non-slumping, ready to use, gel
Solvent free
Totally non flammable
Fully waterproof to EN 204 D4
High performance bonds between a wide range of materials
Excellent weathering and aging properties
Foams slightly to fill gaps
Excellent chemical resistance

View Product

Fast application for wall cladding installation

Cladstikk 12 Surface Bonding Adhesive

Cladstikk® 12 is a solvent and water free MS Polymer adhesive which when used with the multiiiibead gun gives a fast, efficient and clean bonding system ideal for bonding large surfaces like PVC and GRP hygienic wall cladding.

View Product

Suitable for bonding GRP, FRP and some PVC wall cladding panels to walls
100% active, solvent and water free
Permanently flexible
High grab
Full bead elastic product gives excellent sound deadening/acoustic properties
Odourless.
Excellent gap filling properties for uneven surfaces.

View Product

Fast application for wall cladding installation

Cladstikk 19 Surface Bonding Adhesive

Cladstikk® 19 is a solvent and water free adhesive which when used with the multiiiibead gun gives a fast, efficient and clean bonding system ideal for bonding large surfaces like PVC and GRP hygienic wall cladding.

View Product

Suitable for bonding GRP, FRP and some PVC wall cladding panels to walls
100% active, solvent and water free - will not cause warpage or curl of wood blocks/ planks
Permanently flexible -compensates for subfloor movement.
Can also be used for bonding wood flooring
Full bead elastic product gives excellent sound deadening/acoustic properties
Odourless
Excellent gap filling properties for uneven surfaces.

View Product

Solvent free grab adhesive

Soudal Grip All Solvent Free Grab Adhesive

SOLVENT FREE, ultra-strong gap filling grab adhesive with Soudal's unique Reinforced Bonding Technology. High initial grab - 300kg/m2. Very high final bond strength. Compatitble with most building materials, but especially effective on porous surface

View Product

Solvent free construction adhesive
Extreme initial grab - 300kg/m2
Gap filling properties
Fast strength build up
Porous and solvent sensitive materials
Reinforced Bonding Technology

View Product

High performance two component polyurethane

Apollo A9336 Polyurethane Kit

Apollo A9336A/B is a two-part adhesive consisting of an off-white coloured paste base and a dark brown liquid curing agent, and cures to form a hard, tough, resilient bond which is resistant to water, solvents and heat.

View Product

Gap Filling
Heat resistant
High water resistance
Solvent resistant

View Product

Products

Aro-Seal 1101 MS Polymer Adhesive Sealant

Gekko G52 High Performance Contact Adhesive

Aro-Seal 1132 Polyurethane Adhesive Sealant

Woodstikk PU Gel D4 Polyurethane adhesive

multiiiibead MB07 Spreader Nozzle

Aro-Seal 1130 All Purpose PU Sealant

Cladstikk 30 All Purpose MS Polymer Adhesive

multiiiibead Disposable Nozzle

Aro-Seal 1155 Fast Cure MS Polymer Adhesive Sealant

Aro-Bond 905 Fast Curing PU Gel Adhesive

Cladstikk 25 2K Polyurethane Adhesive

Aro-Bond 621 Spray Canister Adhesive

Aro-Bond 693 High Performance Contact Adhesive

multiiiibead Smart Adhesive Dispensing Gun System

Aro-Seal 1162 Neutral Oxime Cure Silicone

Aro-Bond 925 Two Component High Performance Polyurethane Adhesive

Tensorgrip L17 Hi-Temp Resistant Web Spray Contact Adhesive

Aro-Bond 965 Two Component Polyurethane Adhesive

Gekko G93 Aerosol Cleaner

Aro-Bond 930 D4 PU Gel Adhesive

Cladstikk 12 Surface Bonding Adhesive

Cladstikk 19 Surface Bonding Adhesive

Soudal Grip All Solvent Free Grab Adhesive

Apollo A9336 Polyurethane Kit

Let’s get stuck in.