Ureka | Products

Aro-Seal 1101 MS Polymer Adhesive Sealant

Aro-Seal® 1101 is a one component, solvent and water free, elastic construction adhesive based on MS polymers. Aro-Seal 1101 can be used for many construction applications where a strong and flexible bond is required.

View Product

High bond strength on nearly all surfaces
Excellent adhesion to porous surfaces and PVC
No bubble formation within sealant
Good colour stability
Good resistance to UV
Acid, isocyanate and solvent free
Resistance to most chemicals
Overpaintable with all water based paints
Meets requirements of PAS23/24

View Product

Fast curing MS Polymer

Aro-Seal 1155 Fast Cure MS Polymer Adhesive Sealant

Aro-Seal® 1155 is a fast curing, one component, high grab, elastic construction adhesive based on MS polymer. Aro-Seal 1155 can be used for many construction applications where a high grab, fast cure adhesive is required.

View Product

High bond strength on nearly all surfaces
Fast curing
Interior and exterior use
Ideal for bonding skirting boards and stair treads
Can be applied to damp surfaces
Acid, isocyanate and solvent free
Resistant to most chemicals and petrol (10% dilute acids/alkalis, most solvents)
Overpaintable with all water based paints

View Product

Pink 'n' green Methacrylate

Adtech 3295 Toughened Acrylic Adhesive

Adtech 3295 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications.

View Product

Fast cure
High strength
High impact resistance
Bonds GRP structures
Bonds dissimilar metals
Dries translucent

View Product

15 - 30 minute cure MMA

Adtech 9310 Toughened Acrylic Adhesive

Adtech® 9310 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications.

View Product

Fast cure
High strength
High impact resistance
Bonds GRP structures
Bonds dissimilar metals

View Product

Superfast Cyanoacrylate (superglue)

Adtech 4060 Superfast Cyanoacrylate

Adtech® 4060 is a medium viscosity superfast cyanoacrylate adhesive. It is designed for the bonding of a wide range of plastics, rubbers and 'difficult polymers'.

View Product

Medium viscosity
Fast curing
Bonds plastics and rubbers
Excellent humidity resistance

View Product

7 - 12 minute cure MMA

Adtech 9300 Toughened Acrylic Adhesive

Adtech® 9300 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications. 7 - 12 minutes cure speed.

View Product

Fast cure
High strength
High impact resistance
Bonds GRP structures
Bonds dissimilar metals

View Product

Pink 'n' green Methacrylate. Fast cure.

Adtech 9295 Toughened Acrylic Adhesive

Adtech® 9295 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications.

View Product

Fast cure
High strength
High impact resistance
Bonds GRP structures
Bonds dissimilar metals
Dries translucent

View Product

Solvent free grab adhesive

Soudal Grip All Solvent Free Grab Adhesive

SOLVENT FREE, ultra-strong gap filling grab adhesive with Soudal's unique Reinforced Bonding Technology. High initial grab - 300kg/m2. Very high final bond strength. Compatitble with most building materials, but especially effective on porous surface

View Product

Solvent free construction adhesive
Extreme initial grab - 300kg/m2
Gap filling properties
Fast strength build up
Porous and solvent sensitive materials
Reinforced Bonding Technology

View Product

Medium viscosity, superfast curing

Adtech 4010 Superfast Cyanoacrylate

Adtech® 4010 is a medium viscosity superfast cyanoacrylate adhesive.

View Product

Medium viscosity
Fast curing
Bonds plastics and rubbers
Excellent humidity resistance

View Product

Fire retardant MS Polymer

Aro-Seal 1107 Fire Retardant MS Polymer Adhesive

Aro-Seal® 1107 is a one component, solvent and water free, MS Polymer adhesive which has fire retardant properties. Aro-Seal 1107 can be used in many construction and manufacturing applications where a fire retardant bond is required.

View Product

Excellent fire retardant properties
High bond strength on nearly all surfaces
Excellent adhesion to porous surfaces and PVC
No bubble formation within sealant
Good colour stability
Good resistance to UV
Acid, isocyanate and solvent free
Resistance to most chemicals
Overpaintable with all water based paints
Meets requirements of PAS23/24

View Product

Firestopping adhesive

Firestikk FR Firestop MS Polymer Adhesive

Firestikk FR is a high performance, fire resistant, smoke-tight joint MS Polymer adhesive and sealant used for creating penetration firestopping seals and any applications where fire retardance joints are required.

View Product

Excellent fire-retardant properties
Excellent smoke-tight properties
Use for penetration firestop sealing and bonding
Use for fire retardant expansion and construction joints
Bonds components on fire rated structures, e.g. doors
High bond strength

View Product

High Strength 2K PU

Adtech 953 Two Component Polyurethane Adhesive

Adtech® 953 is a two part polyurethane based adhesive which can be used for bonding a wide variety of substrates, but is ideal for applications in manufacturing of aluminium doors and windows.

View Product

Tough adhesive joint
Solvent free
Thixotropic
Good weather resistance
Can be overpainted with many paints
Can be powder coated

View Product

High Strength 2K PU

Adtech 956 Two Component Polyurethane Adhesive

Adtech 956 is a two component polyurethane based adhesive which can be used for bonding a wide variety of substrates. It is ideal for bonding corner joints in aluminium door and window construction (suitable for classic and injection bonding methods

View Product

Tough-hard adhesive joint
Solvent free
Thixotropic
Good weather resistance
UV colour retention
Can be overpainted with many paints
Can be powder coated

View Product

All purpose PU Sealant

Aro-Seal 1130 All Purpose PU Sealant

Aro-Seal® 1130 is a one component high modulus, polyurethane sealant.

View Product

High bond strength on nearly all surfaces
Excellent chemical resistance
Stays elastic after curing
Good colour stability

View Product

Bonds slightly oily surfaces

3M Scotch-Weld Acrylic Adhesive DP8405NS

3M DP8405NS Scotch-Weld Acrylic Adhesive is a non-sag, toughened, two-part acrylic adhesive. This toughened product provides improved adhesion to many plastics and metals, including those with slightly oily surfaces.

View Product

5 minute work life with 20 minutes to structural strength
Durable bond with excellent shear, peel and high impact strength
Bonds to a variety of surfaces, including most metals and plastics
High strength with minimal surface prep
Features spacer beads to control bond line thickness to prevent excessive squeeze out

View Product

Neutral Cure Silicone

Aro-Seal 1162 Neutral Oxime Cure Silicone

Aro-Seal 1162 is a one component professional grade neutral oxime curing silicone sealant used for sealing and flexible jointing in many applications

View Product

Permanently elastic
Weatherproof
Non fading
Suitable for alkaline and metal surfaces
Low odour
Safe to use
Contains additional uPVC adhesion promoters.

View Product

Bonds low surface energy surfaces

Loctite 3038 Polyolefin 2K Acrylic Bonder

LOCTITE AA 3038 is a yellow, pre-mix polyolefin structural bonder which has good impact resistance. It has very good adhesion to low surface energy substrates such as polyolefin substrates (PP, PE) and to e-coated metals.

View Product

Very good adhesion to polyolefin substrates (PP, PE)
Good impact resistance
Working life of 4 min and a fixture time > 40 min
Good adhesion to e-coated metals

View Product

Solvent based high grab panel adhesive

Soudal T-REX Solvent Based Panel Adhesive

Soudal T-Rex is a solvent based gap filling construction adhesive, with Soudal's unique Fibre Reinforced Technology. Very high final bond strength. Compatible with most building materials, porous and non-porous.

View Product

Solvent based construction adhesive
High initial grab - 125kg/m²
Gap filling properties
Fast strength build up
Porous and non-porous materials
Fibre Reinforced Technology

View Product

Superglue Cure Accelarator

Adtech 1001 Cyanoacrylate Activator

Adtech® 1001 is a solvent-based activator formulated to increase the cure speed of Adtech® cyanoacrylate adhesives.

View Product

Accelerates bonds
Low risk of staining on uPVC plastics
Cures cyanoacrylates in adverse conditions.

View Product

Superfast curing accelerator for cyanoacrylates

Adtech 1002 Cyanoacrylate Activator - Superfast

Adtech® 1002 is a superfast solvent-based activator formulated to increase the cure speed of Adtech® cyanoacrylate adhesives.

View Product

Accelerates bonds
Low risk of staining on uPVC plastics
Cures cyanoacrylates in adverse conditions.
Enables superfast curing of cyanoacrylates

View Product

High Strength MS Polymer

Formoa 017 FE MS Polymer Adhesive

Formoa 017 is a high quality single component adhesive-sealant with high stiffness and very high adhesive strength. It is based on MS Polymer, chemically neutral and fully elastic.

View Product

High performance mechanical properties
Combines high stiffness with very high bond strength
High green strength, quick build-up of end strength, high sheer strength after full cure
Does not contain isocyanates, silicone, solvent
Flexible elastic rubber -movement accommodation up to 20%
No bubble formation within sealant (in high temperature and humidity applications)
Very easy to tool and finish
Colour stability and UV resistance
Can be painted wet-on-wet in paint trains with most industrial paints
Withstands all climatic conditions

View Product

Non-mix methacylate adhesive

Adtech 9330 Non-mix Toughened Acrylic Adhesive

Adtech® 9330 is a non-mix two component structural methacrylate adhesive, which is used in conjunction with 1008, 1009 or 1010 activators and has been developed from low odour non-flammable chemistry.

View Product

Low odour
Non flammable
Three cure speeds available
High strength
High impact resistance
Bonds GRP structures
Bonds dissimilar metals

View Product

Crystal Clear MS Polymer Adhesive

Everbuild Stixall Crystal MS Polymer Adhesive

Everbuild Stixall Crystal Clear, based on hybrid polymer technology is the ultimate combined building adhesive and sealant, with the most Extreme power to both bond and seal virtually everything to anything in nearly all conditions, even under water.

View Product

High bonding strength
Solvent free
Interior and exterior use
Quick curing
Overpaintable if required
Resistant to temperature extremes -40°C to +100°C
Resistant to chemicals and petrol
Excellent resistance to UV radiation

View Product

Bonds mirrors without attacking backing

Soudal Mirror Silicone Adhesive

Mirobond is a high-quality neutral, elastical low modulus single component adhesive / sealant based on special silicone polymers.

View Product

Very easy to apply
Does not attack back coating of quality mirrors
Stays fully elastic after curing
Very good adhesion on many materials
Almost no smell

View Product

Products

Aro-Seal 1101 MS Polymer Adhesive Sealant

Aro-Seal 1155 Fast Cure MS Polymer Adhesive Sealant

Adtech 3295 Toughened Acrylic Adhesive

Adtech 9310 Toughened Acrylic Adhesive

Adtech 4060 Superfast Cyanoacrylate

Adtech 9300 Toughened Acrylic Adhesive

Adtech 9295 Toughened Acrylic Adhesive

Soudal Grip All Solvent Free Grab Adhesive

Adtech 4010 Superfast Cyanoacrylate

Aro-Seal 1107 Fire Retardant MS Polymer Adhesive

Firestikk FR Firestop MS Polymer Adhesive

Adtech 953 Two Component Polyurethane Adhesive

Adtech 956 Two Component Polyurethane Adhesive

Aro-Seal 1130 All Purpose PU Sealant

3M Scotch-Weld Acrylic Adhesive DP8405NS

Aro-Seal 1162 Neutral Oxime Cure Silicone

Loctite 3038 Polyolefin 2K Acrylic Bonder

Soudal T-REX Solvent Based Panel Adhesive

Adtech 1001 Cyanoacrylate Activator

Adtech 1002 Cyanoacrylate Activator - Superfast

Formoa 017 FE MS Polymer Adhesive

Adtech 9330 Non-mix Toughened Acrylic Adhesive

Everbuild Stixall Crystal MS Polymer Adhesive

Soudal Mirror Silicone Adhesive

Let’s get stuck in.