Woodstikk® PU D4 is a single component moisture curing polyurethane wood adheisve with excellent water resistant characteristics.
Woodstikk® PU Rapid D4 is a single component moisture curing polyurethane wood adhesive with excellent water resistant characteristics.
Prefere 4535 is a clear liquid melamine-urea resin adhesive, which is used with liquid hardener Prefere 5035 to give a fully weatherproof and structural bond.
Woodstikk® PU Gel D4 is a one component, cartridge-loaded, solvent free, fast setting, moisture curing polyurethane, thixotropic gel. Cures in 5 minutes.
Pfohl Adhesive Spreaders are the benchmark in the industry for applying adhesive to panels. Available in 75mm (GL75), 150mm (GL150) and 200mm (GL200) widths
Woodstikk® HP is a hand applied contact adhesive suitable for a range of internal and external applications.
Apollo A9336A/B is a two-part adhesive consisting of an off-white coloured paste base and a dark brown liquid curing agent, and cures to form a hard, tough, resilient bond which is resistant to water, solvents and heat.
Soudaseal 270HS is a high performance single component adhesive-sealant with high stiffness and very high adhesive strength. The hybrid polymer formulation is chemically neutral and remains flexible when cured.
Soudaflex 40FC is a high modulus PU sealant-adhesive with excellent mechanical performance and chemical resistance for a wide range of bonding and sealing applications on concrete (i.e. floors and walls) and metals.
3M 1000NF Fast Tack Water Based Adhesive is a unique, water-based adhesive specially designed to deliver an effective combination of fast, heat resistant bonding, repositionability and high ultimate strength.
SOLVENT FREE, ultra-strong gap filling grab adhesive with Soudal's unique Reinforced Bonding Technology. High initial grab - 300kg/m2. Very high final bond strength. Compatitble with most building materials, but especially effective on porous surface
TensorGrip L12 is a fast drying contact adhesive with good heat resistance. It is suitable for bonding a variety of materials to sheet timber, metal and some hard plastics. Immediate permanent bonds can be achieved by double-sided applications on mos
TensorGrip L17 is a high performance contact adhesive with a unique resin formula which creates a tough and resilient bond line between decorative surface materials and all common wood substrates.
Soudal T-Rex is a solvent based gap filling construction adhesive, with Soudal's unique Fibre Reinforced Technology. Very high final bond strength. Compatible with most building materials, porous and non-porous.
TensorGrip L90 is suitable for bonding solid surface materials like Getacore sheets to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials.
Apollo A78 has been specifically formulated for use with furniture and seating applications, including the construction of aircraft seating, office seating and flocking applications.
Kleiberit 707.9 is a reactive hotmelt adhesive for high strength bonds on edging. These cartridges are for use with Holz-Her edge banding machines.
FLEXIBLE hybrid polymer grab adhesive developed by Soudal using Flexible Bonding Technology. The flexible properties of the adhesive improve the overall durability of the final bond. The high strength grab adhesive can be used inside and outside, in
BAM Futura 308 represents a new concept in edgebanding hot melts, based on the principal that for quality woodworking operations, adhesives should be clean and easy to handle, odourless and not fume.
TensorGrip L20 is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials.
Apollo (A8513) is a non-flammable, low-pressure, sprayable, synthetic rubber-based primer. It is designed primarily for priming polyurethane foams prior to the application of adhesive tapes and films etc.
Everbuild Stixall Crystal Clear, based on hybrid polymer technology is the ultimate combined building adhesive and sealant, with the most Extreme power to both bond and seal virtually everything to anything in nearly all conditions, even under water.
EVO-STIK TX613 is a thixotropic, non-drip contact adhesive, which is clean, and easy to apply, being non-drip it is ideal for use on vertical as well as horizontal surfaces.
Aro-Bond 949 is a single component moisture curing polyurethane adhesive. It has been developed specifically for applications in the panel manufacturing and laminating industries.