Adtech® 1006 is a solvent-based activator formulated to improve the curing process of Adtech® anaerobic adhesives.
Always consult MSDS before using Adtech® 1006 for the first time.
Spray or apply Adtech® 1006 to one of the substrates to be bonded. Apply the adhesive to the other. For large areas, or where maximum cure speed is required apply Adtech® 1006 to both of the substrates to be bonded.
Adtech® 1006 will not dry completely and remain active for up to 30 days. When adhesive is applied onto the activated substrate assembly should be completed within 10 seconds. The product should be allowed to develop full strength before subjecting to loads (typically 24 – 72 hours depending on bond gap and ambient conditions)
The speed of cure with the activator will depend on the substrates being bonded and the adhesive grade. If used excessively, Adtech® 1006 may cause discoloration.
For safe handling of this product, consult the Safety Data Sheet.
Adtech® Activators are formulated for use in conjunction with Adtech® adhesives.
Use with proper ventilation. Avoid contact with skin and eyes.
Store Adtech® 1006 in a cool place away from direct sunlight. Keep lids tightly closed to avoid evaporation of the solvent carrier. When stored in the original container at 21°C, Adtech® 1006 has a shelf life of 12 months from date of manufacture
Click the button above to ask a question.
Adtech® 6204 is an anaerobic threadlocker designed for the sealing and locking of threaded fasteners which may require easy disassembly with standard hand tools.
Adtech® 6208 is an anaerobic threadlocker designed for the sealing and locking of threaded fasteners.
Adtech® 6505 is an anaerobic pipe sealant adhesive designed for the sealing and locking of metal fittings and pipes.