Adtech 1008 Activator is slow curing activator used with Adtech 9146, a two component structural methacrylate adhesive.
Adtech 1008 Activator is a slow curing activator used with Adtech 9146 and is designed for the bonding of metal, wood, ceramic, ferrite and plastic materials.
This system has been formulated from innovative technology, which enables it to achieve the ultimate balance of mechanical strength & impact resistance whilst still remaining both simple & quick to use. It is very versatile, and can bond a wide variety of substrates without the need for surface primers or conditioners. Typical applications include bonding magnets and ferrites to casings, bonding metal frames to laminated glass in furniture assembly and bonding plastic handles to metal shafts.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.
Carry out surface preparation where required. Apply the activator to one surface and allow the solvent to flash off. Apply adhesive to the other surface and assemble components carefully, clamping if required. It is always easier to remove any excess adhesive prior to cure using a suitable cleaner. Allow the adhesive sufficient time to achieve handling strength before moving or unclamping components.
It is always easier to remove any excess adhesive prior to curing using a suitable cleaner.
Use with proper ventilation.
Avoid contact with skin and eyes.
If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately.
Keep well out of reach of children.
Adtech 1008 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months
Click the button above to ask a question.
Adtech® 9146 is a two component structural methacrylate adhesive, which is used in conjunction with either 1008, 1009 or 1010 activators (slow, medium, fast curing).
Adtech 3295 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications.
Adtech® 9300 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications. 7 - 12 minutes cure speed.
Adtech® 9330 is a non-mix two component structural methacrylate adhesive, which is used in conjunction with 1008, 1009 or 1010 activators and has been developed from low odour non-flammable chemistry.