Ureka | Products | Adtech 1010 Methacrylate Activator

PRODUCT OVERVIEW

Adtech 1010 Activator is a fast curing activator used with Adtech 9146 and is designed for the bonding of metal, wood, ceramic, ferrite and plastic materials.

This system has been formulated from innovative technology, which enables it to achieve the ultimate balance of mechanical strength & impact resistance whilst still remaining both simple & quick to use. It is very versatile, and can bond a wide variety of substrates without the need for surface primers or conditioners. Typical applications include bonding magnets and ferrites to casings, bonding metal frames to laminated glass in furniture assembly and bonding plastic handles to metal shafts.

Featured properties

High strength
High impact resistance
Bonds GRP substrates
Bonds dissimilar metals
Slow cure

PREPARATION AND APPLICATION

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.

Carry out surface preparation where required. Apply the activator to one surface and allow the solvent to flash off. Apply adhesive to the other surface and assemble components carefully, clamping if required. It is always easier to remove any excess adhesive prior to cure using a suitable cleaner. Allow the adhesive sufficient time to achieve handling strength before moving or unclamping components.

Handling and Storage

It is always easier to remove any excess adhesive prior to curing using a suitable cleaner.

Use with proper ventilation.

Avoid contact with skin and eyes.

If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately.

Keep well out of reach of children.

Adtech 1010 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months