Adtech 3295 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications.
Adtech 3295 has been formulated from innovative technology, which enables Adtech 3295 to achieve the ultimate balance of mechanical strength and impact resistance whilst still remaining both simple and quick to use.
Adtech 3295 is very versatile, and can bond a wide variety of substrates without the need for surface primers or conditioners. Typical applications include bonding of metal fasteners into composite parts, bonding of large GRP structures and bonding of dissimilar metals in fabrication applications.
1 x Free nozzle included for every cartridge purchased
Adtech MX01 Mixer Nozzle for 50ml twin pack cartridge
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Apply adhesive sparingly to one surface, align the components and bring the surfaces together quickly. Apply sufficient clamping pressure to ensure the adhesive spreads out effectively. Allow to fully cure before applying load or stress. Excess adhesive can be carefully cleaned up with solvents such as acetone..
It is always easier to remove any excess adhesive prior to curing using a suitable cleaner. Use with proper ventilation. Avoid contact with skin and eyes. If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately. Keep well out of reach of children.
Adtech® AD3295 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months.
We are using it for bonding brass to MDF and brass to aluminium and it's bonding better than anything else we have used!
Keith5 Months Ago
Best glue to stick diamonds to gold?
Bonita5 Months Ago
The first 2 products that we would recommend would be our Adtech 3295 Acrylic adhesive, or our Adtech 9005 Epoxy adhesive.
Roland Day11 Months Ago
Is there a non- corrosive cleaning agent for Adtech3295? and if so do you supply same.
Bonita11 Months Ago
Whilst the adhesive is wet, a conventional all-purpose wipe would be as good as anything. We also have solvent cleaners. Once the adhesive is cured, mechanical removal is the only option.
The Adtech MX50 Dispensing gun is used for dispensing adhesive from twin barreled 50ml cartridges. Available in 1:1 or 10:1 ratio.
Mixer nozzle for use with two component adhesives such as epoxy, polyurethane and methyl methacrylate
Adtech® 9300 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications. 7 - 12 minutes cure speed.
Adtech® 9146 is a two component structural methacrylate adhesive, which is used in conjunction with either 1008, 1009 or 1010 activators (slow, medium, fast curing).