Adtech 4010 Superfast Cyanoacrylate

PRODUCT OVERVIEW

It is designed for the bonding of a wide range of plastics, rubbers and 'difficult polymers'.

Adtech® 4010 outperforms most grades for cure speed and final bond strength, and has excellent humidity resistance. Bonds to plastics and rubbers and usually achieves bonds stronger than the material itself. Adtech® 4010 will also bond metal components, fabrics, ceramic and leather. Difficult plastics such as polyolefins can be treated with primer to achieve acceptable bonds.

SIZES AVAILABLE

• 20g bottle
• 50g bottle
• 500g bottle

Featured Properties

• Medium viscosity
• Fast curing
• Bonds plastics and rubbers
• Excellent humidity resistance

PREPARATION AND APPLICATION

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Apply adhesive sparingly to one surface, align the components and bring the surfaces together quickly. Apply sufficient clamping pressure to ensure the adhesive spreads out effectively. Allow to fully cure before applying load or stress. Excess adhesive can be carefully cleaned up with solvents such as acetone.

Handling and Storage

Use with proper ventilation.  Avoid contact with skin and eyes.  If contact with skin occurs, rinse with warm water or dissolve gradually with appropriate debonder.  Do not try to remove forcibly.  If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately.  Keep well out of reach of children.

Adtech® 4010 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 7°C. In these conditions it has a storage life of at least 12 months.