Adtech® 4060 is a medium viscosity superfast cyanoacrylate adhesive. It is designed for the bonding of a wide range of plastics, rubbers and 'difficult polymers'.
Adtech® 4060 outperforms most grades for cure speed and final bond strength, and has excellent humidity resistance. Bonds to plastics and rubbers and usually achieves bonds stronger than the material itself. Adtech® 4060 will also bond metal components, fabrics, ceramic and leather. Difficult plastics such as polyolefins can be treated with primer to achieve acceptable bonds.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Apply adhesive sparingly to one surface, align the components and bring the surfaces together quickly. Apply sufficient clamping pressure to ensure the adhesive spreads out effectively. Allow to fully cure before applying load or stress. Excess adhesive can be carefully cleaned up with solvents such as acetone.
Use with proper ventilation. Avoid contact with skin and eyes. If contact with skin occurs, rinse with warm water or dissolve gradually with appropriate debonder. Do not try to remove forcibly. If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately. Keep well out of reach of children.
Adtech® 4060 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 7°C. In these conditions it has a storage life of at least 12 months.
Click the button above to ask a question.
The Easiflow HD Cartridge Gun is a high quality, hand operated applicator gun for dispensing adhesives and sealants from cartridges.
Aro-Seal® 1156 is a one component, high modulus, polyurethane adhesive sealant.
Adtech® 6208 is an anaerobic threadlocker designed for the sealing and locking of threaded fasteners.