Adtech 4100 Rubber Toughened Cyanoacrylate

PRODUCT OVERVIEW

Adtech® 4100 cures almost instantly to form a tough flexible thermoplastic bond.

Adtech® 4100 can be used with Adtech® 1001 Activator to accelerate curing in applications such as tacking or strain relief components. Adtech® 4100 is used in a huge variety of industrial applications. From OEM to MRO industries, this grade can be used to bond metals, most plastics, rubbers, glass fibre, ceramics and leather.

SIZES AVAILABLE

• 20g bottle
• 50g bottle
• 500g bottle

Featured Properties

• High performance
• High peel strength
• High shock resistance
• Bonds plastics and rubbers
• Black in colour

PREPARATION AND APPLICATION

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Apply adhesive sparingly to one surface, align the components and bring the surfaces together quickly. Apply sufficient clamping pressure to ensure the adhesive spreads out effectively. Allow to fully cure before applying load or stress. Excess adhesive can be carefully cleaned up with solvents such as acetone.

Handling and Storage

Use with proper ventilation.  Avoid contact with skin and eyes.  If contact with skin occurs, rinse with warm water or dissolve gradually with appropriate debonder.  Do not try to remove forcibly.  If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately.

Keep well out of reach of children.

Adtech® 4100 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 7°C. In these conditions it has a storage life of at least 12 months.