Ureka Global Ltd
(formerly Alansons Industries Ltd)
7 Flowers Hill
+44 (0)117 971 1364
Adtech® 4100 is a high performance, medium viscosity rubber toughened cyanoacrylate, formulated to provide high peel strength and shock resistance on a wide variety of substrates.
Adtech® 4100 cures almost instantly to form a tough flexible thermoplastic bond.
Adtech® 4100 can be used with Adtech® 1001 Activator to accelerate curing in applications such as tacking or strain relief components. Adtech® 4100 is used in a huge variety of industrial applications. From OEM to MRO industries, this grade can be used to bond metals, most plastics, rubbers, glass fibre, ceramics and leather.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Apply adhesive sparingly to one surface, align the components and bring the surfaces together quickly. Apply sufficient clamping pressure to ensure the adhesive spreads out effectively. Allow to fully cure before applying load or stress. Excess adhesive can be carefully cleaned up with solvents such as acetone.
Use with proper ventilation. Avoid contact with skin and eyes. If contact with skin occurs, rinse with warm water or dissolve gradually with appropriate debonder. Do not try to remove forcibly. If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately.
Keep well out of reach of children.
Adtech® 4100 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 7°C. In these conditions it has a storage life of at least 12 months.
Click the button above to ask a question.
Adtech® 1001 is a solvent-based activator formulated to increase the cure speed of Adtech® cyanoacrylate adhesives.
Adtech® 4010 is a medium viscosity superfast cyanoacrylate adhesive.
Adtech® 4109 is a clear, high performance, medium viscosity rubber toughened cyanoacrylate, formulated to provide high peel strength and shock resistance on a wide variety of substrates.