Ureka Global Ltd
(formerly Alansons Industries Ltd)
7 Flowers Hill
+44 (0)117 971 1364
Adtech® 4150 is a high performance, high viscosity cyanoacrylate, designed for the bonding of metal components and will also bond to most plastics, rubbers, cork, ceramics, fabrics and leather.
Adtech® 4150 outperforms most grades for final bond strength and has excellent humidity resistance. Adtech® 4150 is used primarily to bond metal parts, or is used on bonds that require a gap to be filled.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Apply adhesive sparingly to one surface, align the components and bring the surfaces together quickly. Apply sufficient clamping pressure to ensure the adhesive spreads out effectively. Allow to fully cure before applying load or stress. Excess adhesive can be carefully cleaned up with solvents such as acetone.
Use with proper ventilation. Avoid contact with skin and eyes. If contact with skin occurs, rinse with warm water or dissolve gradually with appropriate debonder. Do not try to remove forcibly. If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately. Keep well out of reach of children.
Adtech® 4150 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 7°C. In these conditions it has a storage life of at least 12 months.
Click the button above to ask a question.
Adtech® 1001 is a solvent-based activator formulated to increase the cure speed of Adtech® cyanoacrylate adhesives.
Adtech® 4010 is a medium viscosity superfast cyanoacrylate adhesive.
Adtech® 4109 is a clear, high performance, medium viscosity rubber toughened cyanoacrylate, formulated to provide high peel strength and shock resistance on a wide variety of substrates.