Adtech® 6204 is designed for the sealing and locking of threaded fasteners which may require easy disassembly with standard hand tools.
Adtech® 6204 is a single component, medium strength thixotropic, acrylic based anaerobic nutlock.
Adtech® 6204 cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock. Adtech® 6204 is particularly suitable for uses on less active substrates such as plated surfaces and stainless steel, where disassembly is required with hand tools.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.
The rate of cure is dependent on the substrates being used, the gap fill required and the ambient temperature at the time of the cure. When the cure speed is unacceptably long, or larger gaps are present, using Adtech® 1006 Activator will improve the cure speed. If the material is an inactive metal consider using activator.
Shake the product thoroughly before use. Apply several drops to the bolt & nut. Assemble and tighten as required.
To prevent the clogging of the nozzle, do not let the tip touch metal surface during application.
For disassembly, remove with standard hand tools. In circumstances where hand tools do not work, use localised heat to bolt or nut, disassemble while hot.
Use proper ventilation; avoid contact with skin and eyes. If contact with skin occurs, rinse with warm water or dissolve gradually with appropriate debonder. Do not try to remove forcibly. If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately. Keep well out of reach of children.
To remove cured product use a combination of solvent and abrasion such as a wire brush.
Adtech® 6204 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 20°C. In these conditions it has a storage life of at least 12 months.
Click the button above to ask a question.
The Line Cutter is specifically designed to make cutting of artificial grass sports field lines, straight and curved lines, easy.
Aerolite UP 4145 is a one-component urea one shot powder adhesive, which only requires mixing with water to make it ready for use. Used for many woodworking applications including veneering, laminating and assembly.
Aro-Seal® 1130 is a one component high modulus, polyurethane sealant.