Adtech® 6208 is a single component, medium strength thixotropic, acrylic based anaerobic nutlock.
Adtech® 6208 cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock. Adtech® 6208 is particularly suitable for uses including heavy duty applications, such as nuts onto studs in pump housings and studs into motor housings. Used also on other fasteners where maximum strength is required.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.
The rate of cure is dependent on the substrates being used, the gap fill required and the ambient temperature at the time of the cure. When the cure speed is unacceptably long, or larger gaps are present, using Adtech® 1006 Activator will improve the cure speed. If the material is an inactive metal consider using activator.
Shake the product thoroughly before use. Apply several drops to the bolt & nut. Assemble and tighten as required.
To prevent the clogging of the nozzle, do not let the tip touch metal surface during application.
For disassembly, use localised heat to bolt or nut, disassemble while hot.
Use proper ventilation; avoid contact with skin and eyes. If contact with skin occurs, rinse with warm water or dissolve gradually with appropriate debonder. Do not try to remove forcibly. If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately. Keep well out of reach of children.
To remove cured product use a combination of solvent and abrasion such as a wire brush.
Adtech® 6208 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 20°C. In these conditions it has a storage life of at least 12 months.
Click the button above to ask a question.
Adtech® 6204 is an anaerobic threadlocker designed for the sealing and locking of threaded fasteners which may require easy disassembly with standard hand tools.
Prefere 5610 is a filled, all day pot life, powder hardener which is mixed with Prefere 4152 and is used for veneering, laminating and jointing applications.
Woodstikk® PU Rapid D4 is a single component moisture curing polyurethane wood adhesive with excellent water resistant characteristics.
Adtech® 9330 is a non-mix two component structural methacrylate adhesive, which is used in conjunction with 1008, 1009 or 1010 activators and has been developed from low odour non-flammable chemistry.