Ureka Global Ltd
(formerly Alansons Industries Ltd)
7 Flowers Hill
+44 (0)117 971 1364
Adtech 6606 is designed for the bonding of cylindrical parts particularly where disassembly is required for servicing. Adtech 6606 cures when confined in the absence of air between close fitting metal surfaces, and prevents loosening and leakage from shock and vibration.
Find a stockist
This product is supplied by our valued stockists. To find one near you, please click the button below.
Call us on +44 (0)117 971 1364 or click the button below.
Adtech 6606 is designed for the bonding of cylindrical parts particularly where disassembly is required for servicing. Adtech 6606 cures when confined in the absence of air between close fitting metal surfaces, and prevents loosening and leakage from shock and vibration. Applications include bearing retention onto housings and shafts.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.
The rate of cure is dependent on the substrates being used, the gap fill required and the ambient temperature at the time of the cure. When the cure speed is unacceptably long, or larger gaps are present, using Adtech® 1006 Activator will improve the cure speed. If the material is an inactive metal consider using activator.
Shake the product thoroughly before use.
For Slip Fitted Assemblies, apply the product to the leading edge of the pin and inside the collar.
For shrink fitted assemblies, the adhesive should be coated onto the pin. The collar will then need to be heated to create sufficient
clearance for free assembly.
For press fitted assemblies, apply adhesive thoroughly to both bond surfaces and assemble at high press on rates.
To prevent the clogging of the nozzle, do not let the tip touch metal surface during application.
For disassembly, use localised heat to bolt or nut, disassemble while hot.
Use proper ventilation; avoid contact with skin and eyes.
If contact with skin occurs, rinse with warm water or dissolve gradually with appropriate debonder.
Do not try to remove forcibly.
If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately.
Keep well out of reach of children.
To remove cured product use a combination of solvent and abrasion such as a wire brush
Adtech® 6606 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 20°C. In these conditions it has a storage life of at least 12 months
Click the button above to ask a question.
Adtech® 4100 is a black, high performance, medium viscosity rubber toughened cyanoacrylate, formulated to provide high peel strength and shock resistance on a wide variety of substrates.
Adtech® 6505 is an anaerobic pipe sealant adhesive designed for the sealing and locking of metal fittings and pipes.
Adtech® 6608 is a high strength retainer designed for the bonding of cylindrical fitting parts, particularly where bond gap can approach 0.25mm.
Got an adhesives problem? Let our sticky smarts work for you.
Call us+44 (0)117 971 1364
Get how-to advice, industry news and new innovations — straight to your inbox.