Adtech 9005 Toughened Epoxy

PRODUCT OVERVIEW

Adtech® 9005 provides a permanent bond to metals, ceramics, fibreglass, most plastics and rubbers.

Adtech® 9005 provides excellent bonds to metals, most plastics, glass, ceramics, stone and concrete. Typical applications include repairs to metal castings, manufacture of thermocouples, bonding metal components, potting electronic components and bonding plastic trim.

SIZES AVAILABLE

• 25ml twin pack cartridge
• 50ml twin pack cartridge
• 400ml twin pack cartridge

Featured Properties

• Fast cure
• High strength
• High impact resistance
• Bonds many substrates
• Transparent

Nozzle required

1 x Free nozzle included for every cartridge purchased

multiiiimix MX01 Mixer Nozzle for 50ml twin pack cartridge

multiiiimix MX10 Mixer Nozzle for 25ml twin pack cartridge

multiiiimix MX15 Mixer Nozzle for 200ml and 400ml twin pack cartridge

PREPARATION AND APPLICATION

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Carry our surface preparation where required.

Remove the cap from the cartridge and attach the mixer nozzle provided. Insert the cartridge into the applicator, and dispense sufficient adhesive to ensure equal coverage on the substrate to be bonded. Apply adhesive to one surface and assemble components carefully. Clamp if required. Allow the adhesive sufficient time to reach handling strength before moving or unclamping the components.

Handling and Storage

It is always easier to remove any excess adhesive prior to curing using a suitable cleaner.  Use with proper ventilation.  Avoid contact with skin and eyes.  If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately.  Keep well out of reach of children.

Adtech® 9005 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months