Ureka Global Ltd
Unit 5 Decoypool Road
St Modwen Park
NP19 4RG

0117 971 1364

Adtech 9005 Toughened Epoxy

Adtech® 9005 is a two component structural epoxy adhesive, which cures at room temperature to form a tough, rigid thermoset polymer.

Add to Basket
Available for deliverySpend £500.00 to get free delivery.
Bulk discount availableCall 0117 971 1364 for prices.

Need help?

Call us on 0117 971 1364 or click the button below.

Request a call


Adtech® 9005 provides a permanent bond to metals, ceramics, fibreglass, most plastics and rubbers.

Adtech® 9005 provides excellent bonds to metals, most plastics, glass, ceramics, stone and concrete. Typical applications include repairs to metal castings, manufacture of thermocouples, bonding metal components, potting electronic components and bonding plastic trim.


  • 25ml twin pack cartridge
  • 50ml twin pack cartridge
  • 400ml twin pack cartridge

Featured Properties

  • Fast cure
  • High strength
  • High impact resistance
  • Bonds many substrates
  • Transparent

Nozzle required

1 x Free nozzle included for every cartridge purchased

multiiiimix MX01 Mixer Nozzle for 50ml twin pack cartridge

multiiiimix MX10 Mixer Nozzle for 25ml twin pack cartridge

multiiiimix MX15 Mixer Nozzle for 200ml and 400ml twin pack cartridge


Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Carry our surface preparation where required.

Remove the cap from the cartridge and attach the mixer nozzle provided. Insert the cartridge into the applicator, and dispense sufficient adhesive to ensure equal coverage on the substrate to be bonded. Apply adhesive to one surface and assemble components carefully. Clamp if required. Allow the adhesive sufficient time to reach handling strength before moving or unclamping the components.

Handling and Storage

It is always easier to remove any excess adhesive prior to curing using a suitable cleaner.  Use with proper ventilation.  Avoid contact with skin and eyes.  If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately.  Keep well out of reach of children.

Adtech® 9005 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months


There are no reviews for this product.

Average Rating

Not enough reviews

Questions & AnswersQ&A's

Pascal6 Months Ago

What applicator should I use for a 400ml? and, do I use 1:1 or 10:1 ratio?

Cara6 Months Ago

You will need the COX VBM (MR1) 400X Bi-Mixer Applicator with the 1:1 ratio.

Keith3 Years Ago

Best glue to stick diamonds to gold?

Bonita3 Years Ago

The first 2 products that we would recommend would be our Adtech 3295 Acrylic adhesive, or our Adtech 9005 Epoxy adhesive.

Patrick von Hirschfeld3 Years Ago

And does the 9005 come with a nozzle?
what nozzle do I need to buy?

Kenton3 Years Ago

Yes each 9005 cartridge comes with a nozzle
Adtech MX01 is the correct nozzle for the 50ml cartridge

Patrick von Hirschfeld3 Years Ago

what pressure do you recommend for clamping?

Kenton3 Years Ago

Hand clamping is sufficient depending on the application. The pressure applied needs to be the same until the adhesive has cured.

Patrick von Hirschfeld3 Years Ago

If the ADTECH 9005 requires clamping for curing, how does one prevent all the adhesive from being pushed out the sides?

Kenton3 Years Ago

It is important that the amount of adhesive applied is not excessive that will result in squeeze out of surplus adhesive.



Adtech® 9005 Toughened Epoxy Technical Data sheet




Adtech® 9005 Toughened Epoxy Safety Data sheet Part A




Adtech® 9005 Toughened Epoxy Safety Data sheet Part B



Let’s get stuck in.

Got an adhesives problem? Let our sticky smarts work for you.

Call us0117 971 1364

Email ussales@thenamethatsticks.com

Get how-to advice, industry news and new innovations — straight to your inbox.