Adtech® 9300 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications.
Adtech® 9300 has been formulated from innovative technology, which enables Adtech® 9300 to achieve the ultimate balance of mechanical strength and impact resistance whilst still remaining both simple and quick to use.
Adtech® 9300 is very versatile, and can bond a wide variety of substrates without the need for surface primers or conditioners. Typical applications include bonding of metal fasteners into composite parts, bonding of large GRP structures and bonding of dissimilar metals in fabrication applications.
Adtech MX01 Mixer Nozzle for 50ml twin pack cartridge
Adtech MX15 Mixer Nozzle for 400ml twin pack cartridge
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Carry our surface preparation where required.
Remove the cap from the cartridge and attach the mixer nozzle provided. Insert the cartridge into the applicator, and dispense sufficient adhesive to ensure equal coverage on the substrate to be bonded. Apply adhesive to one surface and assemble components carefully. Clamp if required. Allow the adhesive sufficient time to reach handling strength before moving or unclamping the components.
It is always easier to remove any excess adhesive prior to curing using a suitable cleaner.
Use with proper ventilation. Avoid contact with skin and eyes. If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately. Keep well out of reach of children.
Adtech® 9300 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months
Yep valley joinery2 Months Ago
Is 9300 MMA conductive when cured
Richard Nunn2 Months Ago
Good question Brian! Adtech 9300 is not an electrically conductive adhesive. A new formulation would need to be blended to enable conductivity to happen, and would be governed by batch manufacture. If you would like us to provide any further information, please let me know.
Adtech 3295 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications.
Adtech® 9146 is a two component structural methacrylate adhesive, which is used in conjunction with either 1008, 1009 or 1010 activators (slow, medium, fast curing).
Adtech® 9310 is a two component structural methacrylate adhesive, designed for the bonding of high strength metal and composite applications.