Adtech 9330 Non-mix Toughened Acrylic Adhesive

PRODUCT OVERVIEW

Adtech® 9330 is designed for the bonding of metal, wood, ceramic, ferrite and plastic materials.

Adtech® 9330 has been formulated from innovative technology, which enables Adtech® 9330 to achieve the ultimate balance of mechanical strength and impact resistance whilst still remaining both simple and quick to use.

Adtech® 9330 is very versatile, and can bond a wide variety of substrates wihtout the need for surface primers or conditioners. typical applications include bonding of metal fasteners into composite parts, bonding of large GRP structures and bonding of dissimilar metals in fabrication applications.

SIZES AVAILABLE

• 300g cartridge

Featured Properties

• Low odour
• Non flammable
• Three cure speeds available
• High strength
• High impact resistance
• Bonds GRP structures
• Bonds dissimilar metals

PREPARATION AND APPLICATION

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Carry our surface preparation where required.

Apply the activator to one surface and allow the solvent to flash off. Apply adhesive to the other surface and assemble components carefully, clamping if required. It is always easier to remove any excess adhesive prior to cure using a suitable cleaner. Allow the adhesive sufficient time to achieve handling strength before moving or unclamping components.

Handling and Storage

It is always easier to remove any excess adhesive prior to curing using a suitable cleaner.

Use with proper ventilation.

Avoid contact with skin and eyes. If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately.

Keep well out of reach of children.

Adtech® 9330 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months