Aerodux HRP155 Powder Hardener

PRODUCT OVERVIEW

Aerodux 185 together when mixed with Hardener HRP155 can be used for all waterproof and heat resistant bond requirements. Widely used in the Structural Timber Engineering sector for the manufacture of large laminated structures as well as heat resistant composite products e.g. Fire Doors.

Aerodux 185 is also suitable for use in the production of heat resistant composite structures, eg fire-resisting doors. It is resistant to acids, weak alkalis, solvents and boiling water.

Aerodux 185 together when mixed with Hardener HRP155 meet the requirements of EN301-Type 1 and BS1203 (Type WBP). Prefere 4050 has been tested according to the German Standard DIN 68141 by the MPA, Otto-Graf-Institut in Germany and found to be suited for gluing load-bearing wooden structures for indoor and exterior use in accordance with DIN 1052.

SIZES AVAILABLE

• 200g pail
• 1kg pail
• 2kg pail
• 5.5kg pail
• 25kg sack

Image for illustration purposes only.  Livery and packaging may vary.

Featured Properties

• Bonds wood, improved or densified woods, mineral fibre reinforced boards, brick, concrete and unglazed porcelain
• Bonds industrial and decorative laminated plastics (phenolic resin based or phenolic resin backed).
• Excellent for bonding oily timbers, e.g. teak. iroko etc

PREPARATION AND APPLICATION

Aerodux 185 and Hardener HRP155 are simple to prepare.  The resin is mixed with the hardener on with a 5:1 ratio by weight  . It is essential that Hardener HRP155 is well stirred pouring from the container, as the filler can occasionally separate. Add the required amount of the hardener and mix thoroughly. 

HANDLING AND STORAGE

Consult Safety Data Sheet prior to use.

Hardener HRP155 should be stored firmly sealed in the original container in a cool (ideally 5 – 20°C) dry place. Shelf life under these conditions is at least 3 years.