Apollo A5133 Epoxy Adhesive Kit

Product overview

Apollo (A5133 A/B) is a two-component, high-strength, fire-retardant epoxy resin adhesiveof semi-thixotropic paste consistencyfor application by scraper or trowel.Apollo (A5133 A/B)will bond a variety of building materials including concrete, timber, ceramic tiles and metals to uneven substrates. Apollo (A5133 A/B) is specifically suitable for bonding fire retardant floor coverings,especially cork-filled EPDM, where low smoke and low toxicity is required. In thisapplication it has gained BS:6853 certification for low emissions.

Featured Properties

• High Adhesion two part epoxy adhesive.
• Suitable for bonding fire retardant floor coverings.
• Has gained BS:6853 caerificate for low emissions.

Developed for

• Concrete
• Timber
• Ceramic tiles
• Metals

Preliminaries

1. Each unit is supplied in pre weighed containers:Component A: Resin–Buff,supplied in a plastic container.Component B: Hardener-Clear/Yellow,supplied in a foil sachet.

2. The adhesive should be thoroughly mixed in the proportions supplied, or in the mixratio of 7.8:1, by weight.

Preparation

1. Ensure all surfaces are thoroughly cleaned, degreased if necessaryand dried.

2. Ensure that ComponentsA and B are thoroughly mixed.

Application

1. Once mixed, Apollo (A5133 A/B) has a 45-60 minute pot-life (5Kg kit).

2. The adhesive can be trowelled out over one surface(usually the least porous).

3. Bring into contact with the other surface,ensure the two surfaces are held in contact whilst the adhesivecures.

4. The adhesive gives a tack-free film within 6-8 hours, but full cure is not achieved until 24-72 hours dependantupon ambient temperatures.