Apollo A66 Coating

Product Overview

Apollo (A66) has been specifically developed for coating a wide range of foams to guard against liquid ingress, including water, oil and chemicals. It is a sprayable PVC coating that offers the manufacturer many benefits.

Featured properties

• Easy to spray on or brush on.
• Prevents water ingress into foams and other materials.
• Minimises cost and waste
• Complete peace of mind: dries to produce a tough resilient film
• Minimises task-time: dries within minutes of application
• Ideal for most types of foam: can be supplied in a range of colors

1.Ensure all surfaces to be bonded are clean and free from grease and other contaminants.

2.Apollo (A66) may be sprayed by hand or sprayed through most equipment, but for best results we recommend aDeVilbiss JGV-562 gun fitted with an FX fluid tip/needle and a 777 air-cap. An atomizing pressure of 60-80 psi anda material pressure of 20-30psi is required.

3.Apply an even coat of coating to the foam surface. The amount required will depend on the type of foam, but a coat 0.5mm thick is required. Ensure the first coat of (A66) provides sufficient adhesion to the foam, before applyingadditional coats.

4.Several coats maybe required to obtain the required film thickness.