Apollo A6814 Water Based Contact Adhesive

Product overview

Apollo (A6814 A/B) has been developed specificallyfor the manufacture of foam products, such as mattresses, sofas, chairs, and other high traffic foam products. It is a two-part solvent-free, non-flammable sprayable adhesive that offers the manufacturer many benefits.

featured properties

• Ideal for creating upholstery & furniture items: strong, yet soft bond lines, low odor. Apollo (A6814 A/B) is ideal for use in the manufacture of upholstery and furniture items. It securely bonds flexible and softfoam to itself as well as a wide range of other materials, including wood, plastics and metal. The bonds it creates areextremely strong, but still provide a soft bond line, ensuring clean cutting lines. It also has an excellent heat resistance (-30-100°C) and benefits from an extremely low odor.
• Minimises task-time: easy to mix kit, aggressive tack. Apollo (A6814 A/B) helps to minimise task-time because it is supplied in an easy to mix two-component kit. Bothcomponents are supplied in the correct ratios to avoid inaccurate mixing through human error. It also develops anaggressive tack immediately after application allowing for substrates to be brought together immediately.

• Extremely economical: sprayable high solids adhesive. At Apollo, we understand the need to an economical adhesive. Apollo (A6814 A/B) is a high solids, sprayable adhesive,this ensures excellent coverage (up to 40m² per litre) and reduces waste, which keeps the amount of adhesive used to aminimum.
• Green credentials: solvent-free water-based adhesive. Green credentials are becoming increasingly important across all industries, and this trend is set to continue. Apollo(A6814 A/B) is a solvent-free water-based adhesive, which makes the product more pleasant to use and suitable for awide range of projects.Apollo (A6814 A/B)BaseSynthetic LatexTack-Life0-10 minutesAppearanceWhiteShelf Life12 months Temperature Resistance-30-100°CStorage5-25°CCoverageUpto 40m²EnvironmentalSolvent-Free/Non-Flammable/Non-HazardousApplication Temperature5-25°CCleanerSolvent 1Viscosity CPS100 @ 20°CTechnical Data Solids ContentPart A: 45% Part B:10%
   

1.Ensure surfaces to be bonded are clean and free from grease and other contaminants. Metal surfaces in particularshould be grease free and flexible foams should not be contaminated with silicone from the cutting operation.

2.Apollo (A6814 A/B) may be sprayed by hand or sprayed through most equipment, but for best results werecommend a DeVilbiss JGV-562 gun fitted with an FX fluid tip/needle and a 777 air-cap. An atomising pressure of20-70 psi and a fluid pressure of 10-30 psi is required. NB: a double pressure pot system and two componentgun are required.

3.Apply Apollo (A6814 A/B) to both surfaces of the glue line. The amount required will vary according to porosity ofthe substrate, but is usually in the range of 15-40gsm (dry) per square metre.

4.The surfaces should be joined within 10 minutes of the adhesive being sprayed and pressure applied via nip rollersor a short period in a platen or other type of press.