Ureka Global Ltd
Unit 5 Decoypool Road
St Modwen Park
Newport
NP19 4RG

0117 971 1364
sales@thenamethatsticks.com

Apollo A7510 GP MCPU D4 Adhesive

Apollo Construction (A7510) was developed specifically for internal and external wood applications, including kitchen fitting, skirting and general repairs. It can also be used for the edge jointing of Structural Insualted Panels (SIPs). It is a single-component (1K) moisture-curing polyurethane (MCPU) adhesive.

Add to Basket
Coverage Calculator
Available for deliverySpend £500.00 to get free delivery.
Bulk discount availableCall 0117 971 1364 for prices.

Find a stockist

This product is supplied by our valued stockists. To find one near you, please click the button below.

Find a stockist

Need help?

Call us on 0117 971 1364 or click the button below.

Request a call

product overview

Apollo A7510 is moisture curing single part, Polyurethane adhesive specifically designed for applications in the panel manufacturing and laminating industries where it is required to bond many types of plastic foams and other insulating materials to a wide variety of both rigid and flexible facing materials.

Such composites form structural sandwich panels and insulated building boards and may be used in the manufacture of cold stores, caravans, mobile homes and offices, insulated building units etc.

Apollo A7510 has a long open time, which gives more open time to work with.

Featured properties

Multipurpose adhesive: suitable for horizontal surfaces. The consistency of Apollo Construction (A7510) makes it ideal for use on large horizontal surfaces, both onsite and in a workshop. It also helps to minimise the number of adhesives you need to store because it is multipurpose and can be used to bond wood to a variety of materials, including OSB, wood, laminates and metal.

Minimises task time and cost: one-way stick and easy application. Apollo Construction (A7510) ensures an economical usage rate due to its one-way stick application; which also helps to minimise task time. It is easy to apply via the bottle, brush or trowel, ensuring quick and simple application.

Disguises a multitude of sins: gap-filling properties. Most construction professionals will have experienced uneven joints and the problems they can cause. Apollo Construction (A7510) has excellent gap-filling properties that disguise uneven joints and imperfections, thereby helping to reduce these problems.

Peace of mind: waterproof to EN 204 D4 and has excellent weathering and aging properties. At Apollo, we understand you require peace of mind that the adhesive you are using can withstand the rigors of different environmental conditions. Apollo Construction (A7510) ensures a high-strength permanent bond quickly, which is waterproof to EN 204 D4 and has excellent weathering and aging properties.

Green credentials: solvent-free. Green credentials are becoming increasingly important within the construction industry, and this is set to continue. Apollo Construction (A7510) is solvent-free which makes it more environmentally friendly and pleasant to use compared to solvent-based products (VOCs). It also makes it suitable for use on a wide range of projects, even those with high levels of public usage, such as schools and hospitals.

Developed for

  • Cold stores
  • Caravans
  • Mobile homes
  • Offices
  • Insulated building units

Instructions for use:

Substrate preparation/priming:

1. Ensure surfaces to be bonded are clean and free fromgrease and other contaminants.

General Application:

1. Apply Apollo (A7510) to one surfaceonly. The amount of adhesive will vary according to theporosity/smoothness of both substrates. Recommendedcoat-weight is 80-140g/m².

2. Once the adhesive has been applied, it should be over-misted with water (approximately 10% of water - basedon the adhesive coating weight is the optimum amount- excessive amounts of water should be avoided). Certainsubstrates, such as wood will contain enough moisture tocure the adhesive, however, the open and cure times willbe prolonged.

3. Assemble the substrate and place under pressure within10 minutes of adhesive application.

4. Maintain pressure until the adhesive is sufficiently curedto permit handling of the bonded items (30 minutes).

5. It will take 24 hours for full cure to be achieved andhandling within this period should be kept to a minimum.

NB One of the substrates to be bonded must be porous/permeable.

Application for the edge jointing of SIPs:

1. The adhesive is supplied in a 1 Litre poly bottle for easyapplication straight from the bottle.

2. The nozzle should be cut to a diameter of 5mmx2mm.

3. The adhesive is to be applied along the length of thespline and the SIPs clamped together or nailed until fullycured.

 

Reviews

There are no reviews for this product.

Average Rating

Not enough reviews

Questions & AnswersQ&A's

Click the button above to ask a question.

Downloads

PDF

Apollo A7510 TDS

pdf

Apollo A7510 GP MCPU D4 Adhesive technical data sheet

Download

PDF

Apollo A7510 SDS

pdf

Apollo A7510 GP MCPU D4 Adhesive safety data sheet

Download

Coverage Calculator

Use our adhesive coverage calculator to find out how much you need for your project.

Based on your m2 you need:

kg of Apollo A7510 GP MCPU D4 Adhesive.

Including 10% wastage.

How do we calculate this?

1kg of Apollo A7510 GP MCPU D4 Adhesive covers 12m2. You require enough product to cover m2 including 10% wastage. m2 / 12m2 per kg = kg of product.

Calculate Coverage

Coverage Calculator

Use our adhesive coverage calculator to find out how much you need for your project.

Based on your m2 you need:

kg of Apollo A7510 GP MCPU D4 Adhesive.

Including 10% wastage.

How do we calculate this?

1kg of Apollo A7510 GP MCPU D4 Adhesive covers 12m2. You require enough product to cover m2 including 10% wastage. m2 / 12m2 per kg = kg of product.

Calculate Coverage

Let’s get stuck in.

Got an adhesives problem? Let our sticky smarts work for you.

Call us0117 971 1364

Email ussales@thenamethatsticks.com

Get how-to advice, industry news and new innovations — straight to your inbox.