Aro-Seal® 1101 is a one component, solvent and water free, elastic construction adhesive based on hybrid polymers.
Aro-Seal® 1101 can be used for bonding and sealing a wide range of substrates in both structural and non-structural applications.
Aro-Seal® 1101 is suitable for use in low-movement joints in construction, automotive, marine and aerospace industries where a tough flexible rubber is required. Joints may accommodate movement up to 25%. Aro-Seal® 1101 is used in composite door manufacturing applications and meets the requirements of PAS23/24 certification for "Secured by Design" door systems.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Recommended application temperature is within the range of 1°C to 30°C.
Insert the cartridge into a suitable applicator, e.g. a skeleton gun, or pneumatic applicator. Slit the cap and screw on the nozzle. If required, slit the nozzle to increase the size of the orifice. Dispense the bead of adhesive on one side of the substrates to be bonded. Bring substrates together and apply pressure to ensure full contact.
For porous surfaces Aro-Seal® 1139 Primer may be used to improve the cure, where preliminary adhesion tests indicate that it would be advisable. Likewise, where necessary, Aro-Seal® Surface Activator may be used on non-porous surfaces.
Aro-Seal® 1101 should be stored in the original cartridges in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months.
Click the button above to ask a question.
Aro-Seal® 1132 is a high performance, one component, high modulus, polyurethane sealant.
Aro-Seal® 1155 is a fast curing, one component, high grab, elastic construction adhesive based on MS polymer.
The Airflow III is an air powered dispenser gun which is used to dispense cartridges of adhesive and sealant quickly, consistently and efficiently.