Aro-Seal® 1107 is a one component, solvent and water free, elastic construction adhesive based on hybrid polymers.
Aro-Seal® 1107 can be used for bonding and sealing a wide range of substrates in both structural and non-structural applications and gives excellent fire retardant properties.
Aro-Seal® 1107 is suitable for use in low-movement joints in construction, automotive, marine and aerospace industries where a tough flexible rubber is required. Joints may accommodate movement up to 25%. Aro-Seal® 1107 is used in composite door manufacturing applications and meets the requirements of PAS23/24 certification for "Secured by Design" door systems.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Recommended application temperature is within the range of 1°C to 30°C.
Insert the cartridge into a suitable applicator, e.g. a skeleton gun, or pneumatic applicator. Slit the cap and screw on the nozzle. If required, slit the nozzle to increase the size of the orifice. Dispense the bead of adhesive on one side of the substrates to be bonded. Bring substrates together and apply pressure to ensure full contact.
For porous surfaces Aro-Seal® 1139 Primer may be used to improve the cure, where preliminary adhesion tests indicate that it would be advisable. Likewise, where necessary, Aro-Seal® Surface Activator may be used on non-porous surfaces.
Aro-Seal® 1107 should be stored in the original cartridges in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months.
George McKenna7 Months Ago
My Company uses your product during manufacture of composite fire doors. Is Aro-Seal 1107 available in white?
Cara7 Months Ago
Thank you for the enquiry George.
Aro-Seal 1107 is not currently available in white.
We are however working hard on it, so watch this space!
Aro-Seal® 1155 is a fast curing, one component, high grab, elastic construction adhesive based on MS polymer. Aro-Seal 1155 can be used for many construction applications where a high grab, fast cure adhesive is required.
Aro-Bond® 905 is a one component, cartridge-loaded, solvent free, fast setting, moisture curing polyurethane, thixotropic gel. Cures in 5 minutes.
Prefere 4050 can be used for bonding glulam beams, teak and iroko garden furniture, wooden boat applications, accoya etc. Formerly Aerodux 500.