Aro-Bond 3035 Hot Melt Adhesive
Aro-Bond 3035 has been formulated as a versatile, high performance adhesive for product assembly and has a high cohesive strength with good adhesion to a wide variety of plastics and other surfaces.
Need help?
Call us on 0117 971 1364 or click the button below.
PRODUCT OVERVIEW
Aro-Bond 3035 bonds well to most plastics, e.g. acrylics, polyethylene, polypropylene, a.b.s., polystyrene, polycarbonate and phenolic resins.
It is also suitable for bonding aluminium, ceramics, fibreglass, hard and soft woods.
SIZES AVAILABLE
- 20kg sack
Featured Properties
- High cohesive strength
- Bonds most plastics
- High performance
PREPARATION AND APPLICATION
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.
Aro-Bond 3035 is applied using hot melt application machinery. Suggested methods of application include jet, nozzle and roller coating. The suggested application temperature is between 170°C to 190°C but application equipment and effect of heat on the substrates to be bonded must be taken into account.
Handling and Storage
Use protective clothing and take normal precautions when using hot liquids.
Burns: do not attempt to remove cold adhesive from skin – seek medical advice.
Hot Fumes: Do not inhale. Use in well ventilated areas.
Fire Risk: Use at recommended running temperatures.
Aro-Bond 3035 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 30°C. Aro-Bond 3035 must not be allowed to freeze.
Reviews
There are no reviews for this product.
Questions & AnswersQ&A's
Click the button above to ask a question.
Downloads
Aro-Bond® 3035 Hot Melt Adhesive Technical Data Sheet
pdf
Aro-Bond® 3035 Hot Melt Adhesive Safety Data Sheet
pdf
