Ureka Global Ltd
(formerly Alansons Industries Ltd)
7 Flowers Hill
+44 (0)117 971 1364
Aro-Bond® 684 is a clear thixotropic gel with a long open time and is designed for bonding ABS and UPVC plastics to themselves or each other.
Aro-Bond® 684 rapidly develops high bond strength, enabling assembled units to be handled and put into service very quickly.
Aro-Bond® 684 conforms to BS 6209 for non-pressure thermoplastic pipes and conduits.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.
On the pipes to be bonded, cut the ends squarely. Remove swarf from inner and outer edges and lightly chamfer outer edge. Lightly abrade pipe and socket with emery cloth then de-grease with a suitable cleaning fluid. Using a clean brush, quickly apply an even and generous coating of Aro-Bond® 684 to the pipe in a lengthwise direction and a similar but lighter coat to the fitting. Immediately push together to the full depth, without twisting. Hold in place for 20-30 seconds then clean off excess adhesive. Allow at least 10 minutes before handling and a further 8 hours before putting into service.
Reseal can immediately after use.
Consult Material Safety Data Sheet prior to use.
Aro-Bond® 684 should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 30°C. In these conditions it has a storage life of 12 months.
Click the button above to ask a question.
Adtech® 470 is a low viscosity, clear weld cement for bonding acrylic to itself and to other substrates.
Aro-Bond® 693 is a hand applied contact adhesive suitable for a range of internal and external applications.
Adtech® 6505 is an anaerobic pipe sealant adhesive designed for the sealing and locking of metal fittings and pipes.
LOCTITE 55 is designed for sealing of metal and plastic pipes and fittings. It needs no cure time and results in an immediate, full pressure seal. The product has approval for gas and potable water and is certified to NSF/ANSI, Standard 61.