Ureka Global Ltd
Unit 5 Decoypool Road
St Modwen Park
NP19 4RG

0117 971 1364

Aro-Bond 905 Fast Curing PU Gel Adhesive

Aro-Bond® 905 is a one part, cartridge-loaded, solvent free, fast setting, moisture curing polyurethane, thixotropic gel.

Add to Basket
Available for deliverySpend £500.00 to get free delivery.
Bulk discount availableCall 0117 971 1364 for prices.

Need help?

Call us on 0117 971 1364 or click the button below.

Request a call


Aro-Bond® 905 has been formulated for high performance water-resistant bonds between a wide range of materials.

The thixotropic nature of the gel prevents slumping and gives a level of gap filling to the bond. Aro-Bond® 905 has excellent adhesion to wood, chipboard, polyurethane, mineral wool, concrete, stone, bricks, gypsum boards and all traditional porous substrates and van be used in a wide range of bonding applications. Aro-Bond® 905 is ideal for all types of wood bonding and joinery, bonding wooden constructions, boats, jointing sandwich panels, and insulation as well as many other applications.


  • 310ml cartridge

Featured Properties

  • Non-slumping, ready to use, gel
  • Solvent free
  • Totally non flammable
  • Fully waterproof to EN 204 D4
  • High performance bonds between a wide range of materials
  • Excellent weathering and aging properties
  • Foams slightly to fill gaps
  • Excellent chemical resistance



At least one of the surfaces to be bonded must be porous and ensure surfaces are always clamped during cure.

Firstly cut tip of the cartridge and screw on the nozzle. Cut nozzle to an angle of 45 degrees. Apply the adhesive, using a standard cartridge gun, to one of the surfaces to be bonded and assemble the bond immediately (within 5 minutes). Apply pressure to the bond, by means of a clamp. The product will foam slightly on application to fill any small gaps. Clean away any excess adhesive immediately.

Under normal conditions the gel will skin over after approximately 5 minutes and give a handleable cure within 10 minutes and final bond strength acheived in 12 hours.

Handling and Storage

The product should be stored unopened in a dry condition at a temperature of 10 - 25°C. This will ensure the stated shelf-life of 12 months. The adhesive will have a limited life once the container is opened.


There are no reviews for this product.

Average Rating

Not enough reviews

Questions & AnswersQ&A's

Joshua3 Years Ago

Which PU glue is the lowest foaming ?
It will be used to bond Accoya

Donovan3 Years Ago

I would suggest either Aro-Bond 905/930 or Aro-Bond 947. Both are low foaming products. The cartridge PU (905/930) is a PU gel meaning it is a very low foam product.



Aro-Bond® 905 Technical Data sheet




Aro-Bond® 905 Safety Data sheet



Let’s get stuck in.

Got an adhesives problem? Let our sticky smarts work for you.

Call us0117 971 1364

Email ussales@thenamethatsticks.com

Get how-to advice, industry news and new innovations — straight to your inbox.