Aro-Bond 965 Two Component Polyurethane Adhesive

PRODUCT OVERVIEW

Aro-Bond® 965 is a two part polyurethane based adhesive designed for bonding many types of substrates including GRP and PVC wall cladding panels.  Aro-Bond® 965 is supplied in the correct ratios for mixing.

Aro-Bond® 965 can be described as a non-VOC accoding to European directive (1999/13/EC) and American legislation (CARB/EPA 40FR 59.203 (f)1).

Featured Properties

• Fast curing
• Good gap fill
• VOC free
• Ready to mix pack sizes

PREPARATION AND APPLICATION

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Most construction grade materials are suitable such as wood, concrete, brick, insulation materials, porous and non-porous.

Pour the contents of Part B container into the Part A container and mix thoroughly. A mechanical mixer gives the best mixing results.

Apply the mixed adhesive to the substrate by means of a scraper or notched trowel.

Bed the material to be bonded into adhesive and allow to cure.

The adhesive quickly sets up sufficiently to hold components in position but full cure will require up to 24 hours.

Handling and Storage

Consult Safety Data Sheet prior to use.

Always test Aro-Bond® 965 to determine suitability for your particular application prior to use in production.

SDS must be read and understood before use.

Aro-Bond® 965 should be stored in the original cartridges in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 6 months.