Aro-Bond 9791 Wet Pour PU Binder Primer

Product Overview

Aro-Bond 9791 is a moisture curing polyurethane based wet pour primer used in the installation of safety surfaces.  It is low viscosity, solvent free, single component and based on polyether polyols.

SIZES AVAILABLE

• 1kg Bottle
• 5kg Jerrican
• 25kg Jerrican

Properties

• Low viscosity
• Single component
• Improves bond integrity

PREPARATION AND APPLICATION

Aro-Bond® 9791 based mixtures should not be applied to wet surfaces, i.e. surfaces where there are visible signs of moisture, although damp substrates can be treated provided that the material is well brushed into the surface. Aro-Bond® 9791 can be used after rain when the surface has visibly dried. The coverage rate of the primer will be very dependent on the nature of the surface and the method of use and is normally in the range of 2-3 m2/kg.

HANDLING AND STORAGE

Aro-Bond 9791® should be stored in the original containers in a cool, dry place, at a temperature range of between 15°C and 30°C. In these conditions it has a storage life of 9 months at the customer.

Aro-Bond 9791® must be protected from frost and during handling, it must be protected from water ingress and from atmospheric moisture. Avoid unnecessary opening of containers.

Do not add any other materials to this product without written permission from the manufacturer. Once opened Aro-Bond 9791® will start to cure and a skin will form. Partly used containers should be resealed immediately and re-used as quickly as possible.