Aro-Bond® 980 is a two-component liquid polyurethane system which produces a tough elastic compound and can be used in a number of different applications.
Aro-bond® 980 is used for applications such as aggregate binding in decorative outdoor surfacing applications, and for potting applications in various industries including electronics.
• Low viscosity
• Tough elastic final cure
• Easy to mix
• Fast gel time
Aro-Bond® 980 should only be used in perfectly dry conditions. Substrates should be prepared to be clean, dry and free from any excess dust or loose
Mix the two components in a container at a mix ratio of 1:1 (Part A: Part B) by weight. Mixing should take place by stirring Part A for approximately
one minute to disperse any settlement. Add Part B and continue to stir until fully mixed. Full mixing should take no longer than 60 seconds using
mechanical mixers. The mixed material remains in a mobile. Liquid form for approximately 10 minutes after which a light gel is formed. After a further 15
minutes the material sets to a soft solid.
Aro-Bond® 980 should be stored in the original in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of 12 months at the customer.
Click the button above to ask a question.
Woodstikk 19 is an MS Polymer adhesive used for bonding wood flooring, wood blocks, parquet flooring, engineered wood flooring
The AirFlow I VBA 200B is an air powered dispenser gun used for dispensing 400ml twin barreled cartridges of adhesives
Inside this box lies the key to reaching the optimum potential of the Tensor adhesive range bringing your work to new heights of quality and performance. Includes spray gun, spray hose, pressure roller and free football.