Aro-Bond Solvent 6 is a dichloromethane based chemical which can be used for cleaning adhesive overspray, guns, hoses, spray tips and surfaces
Aro-Bond® Solvent 6 Cleaner is a heavy duty dichloromethane based cleaner used primarily for flushing through spray guns and hoses, and cleaning equipment which has been used with dichloromethane based adhesives. Aro-Bond® Solvent 6 can also be used for cleaning any wet or partially cured overspray after adhesive application.
If cleaning spray equipment fill the spray pot with the relevant quantity of Aro-Bond® Solvent 6 and flush through the system. For overspray cleaning, use a suitable rag or cloth and douse with solvent, and wipe across area affected. Ensure health and safety recommendations and adhered to – consult safety data sheet for more information.
Aro-Bond® Solvent 6 should be stored in the original containers in a cool, dry place, at a temperature range of between 10°C and 25°C.
Click the button above to ask a question.
Aro-Bond® 684 is a clear thixotropic gel with a long open time and is designed for welding and bonding ABS and UPVC plastics to themselves or each other.
Adtech® 470 is a low viscosity, clear weld cement for bonding acrylic to itself and to other substrates.
Aro-Bond® 925 is a two component polyurethane, general purpose, water resistant, gap filling adhesive suitable for bonding a wide range of construction materials in both interior and exterior applications.