Aro-Seal® 1132 is a one component, high modulus, polyurethane sealant.
Aro-Seal® 1132 can be used for bonding and sealing a wide range of substrates in both structural and non-structural applications
Aro-Seal® 1132 is suitable for use in sealing and bonding applications in the construction industries, flooring applications and structural bonding in vibrating constructions.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Recommended application temperature is within the range of 5°C to 30°C.
Insert the cartridge or sachet into a suitable applicator, e.g. a skeleton gun, or pneumatic applicator. Slit the cap, or the end of the sachet, and screw on the nozzle. If required, slit the nozzle to increase the size of the orifice. Dispense the bead of adhesive on one side of the substrates to be bonded. Bring substrates together and apply pressure to ensure full contact.
For porous surfaces a suitable primer may be used to improve the cure, where preliminary adhesion tests indicate that it would be advisable. Likewise, where necessary, Aro-Seal® Surface Activator may be used on non-porous surfaces.
Aro-Seal® 1132 should be stored in the original cartridges in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months in cartridges.
Click the button above to ask a question.
Aro-Seal® 1155 is a fast curing, one component, high grab, elastic construction adhesive based on MS polymer. Aro-Seal 1155 can be used for many construction applications where a high grab, fast cure adhesive is required.
Aro-Seal® 1101 is a one component, solvent and water free, elastic construction adhesive based on MS polymers. Aro-Seal 1101 can be used for many construction applications where a strong and flexible bond is required.
Aro-Seal® 1107 is a one component, solvent and water free, MS Polymer adhesive which has fire retardant properties. Aro-Seal 1107 can be used in many construction and manufacturing applications where a fire retardant bond is required.