Aro-Seal® 1155 is a fast curing, one component, solvent and water free, elastic construction adhesive based on MS polymer.
Aro-Seal® 1155 can be used for bonding and sealing a wide range of substrates in both structural and non-structural applications.
Aro-Seal® 1155 gives excellent adhesion when bonding many substrates such as concrete, brick, wood, natural or artificial stone, ceramics, glass, metals, and most plastics. It gives good adhesive on damp surfaces and has good resistance to UV.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Recommended application temperature is within the range of 1°C to 30°C.
Insert the cartridge into a suitable applicator, e.g. a skeleton gun, or pneumatic applicator. Slit the cap and screw on the nozzle. If required, slit the nozzle to increase the size of the orifice. Dispense the bead of adhesive on one side of the substrates to be bonded. Bring substrates together and apply pressure to ensure full contact.
For porous surfaces Aro-Seal® 1139 Primer may be used to improve the cure, where preliminary adhesion tests indicate that it would be advisable. Likewise, where necessary, Aro-Seal® Surface Activator may be used on non-porous surfaces.
Aro-Seal® 1155 should be stored in the original cartridges in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months.
Click the button above to ask a question.
Prefere 5610 is a filled, all day pot life, powder hardener which is mixed with Prefere 4152 and is used for veneering, laminating and jointing applications.
Aerodux 185 is mixed with Hardener HRP155 and is a phenol-resorcinol adhesive that is mainly used in the manufacture of load bearing timber structure.
Prefere 5664 is a filled, all day pot life, powder hardener which is mixed with Prefere 4152 and is used for veneering, laminating and jointing applications.