Aro-Seal® 1155 is a fast curing, one component, solvent and water free, elastic construction adhesive based on MS polymer.
Aro-Seal® 1155 can be used for bonding and sealing a wide range of substrates in both structural and non-structural applications.
Aro-Seal® 1155 gives excellent adhesion when bonding many substrates such as concrete, brick, wood, natural or artificial stone, ceramics, glass, metals, and most plastics. It gives good adhesive on damp surfaces and has good resistance to UV.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Recommended application temperature is within the range of 1°C to 30°C.
Insert the cartridge into a suitable applicator, e.g. a skeleton gun, or pneumatic applicator. Slit the cap and screw on the nozzle. If required, slit the nozzle to increase the size of the orifice. Dispense the bead of adhesive on one side of the substrates to be bonded. Bring substrates together and apply pressure to ensure full contact.
For porous surfaces Aro-Seal® 1139 Primer may be used to improve the cure, where preliminary adhesion tests indicate that it would be advisable. Likewise, where necessary, Aro-Seal® Surface Activator may be used on non-porous surfaces.
Aro-Seal® 1155 should be stored in the original cartridges in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months.
Click the button above to ask a question.
Aro-Seal® 1101 is a one component, solvent and water free, elastic construction adhesive based on MS polymers.
Aro-Seal® 1130 is a one component high modulus, polyurethane sealant.
Aro-Seal® 1156 is a one component, high modulus, polyurethane adhesive sealant.