Cascarez Liquid Resin Polymer Wood Glue - Fast Grab

PRODUCT OVERVIEW

The ultimate fast grab wood adhesive. The exceptionally high solids content ensure that it’s the fastest, strongest adhesive of its type. Used correctly it will bond most woods in 10 minutes and be ready to handle in 30 minutes. Bonds stronger than the wood itself in less than 2 hours! Suitable for all woods and joinery, assembly of doors, window frames and furniture but not suitable for continuous immersion in water.

SIZES AVAILABLE

• 125ml bottle
• 250ml bottle
• 500ml bottle
• 1ltr bottle
• 5ltr jerrican
• 25ltr jerrican

Featured Properties

• Meets requirements of BS EN 204 D3
• Good water resistance
• Quick curing
• Very strong bond
• Suitable for hot or cold press bonding
• Suitable for bonding with Radio Frequency equipment

PREPARATION AND APPLICATION

Joints should be smooth and well fitted.  The surfaces to be bonded must be close fitting and free from dirt, grease or any other contamination that may interfere with the adhesion.  Moisture content of timber should be 5 to15 %.  Abrading the surface of the joint before assemble is recommended

Apply the glue using a stiff brush or adhesive glue roller to one surface only.  Assemble and clamp (pin or screw) the joint whilst glue is wet.  Keep the joint under pressure until set.  A damp cloth can be used to remove excess wet adhesive.

For full instructions refer to the Technical Data Sheet.

HANDLING AND STORAGE

Cascarez should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 20°C.