Cladstikk 30 All Purpose MS Polymer Adhesive

PRODUCT OVERVIEW

Cladstikk 30 can be used for bonding and sealing a wide range of substrates in both structural and non-structural applications.

Cladstikk 30 gives excellent adhesion when bonding many substrates such as concrete, brick, wood, natural or artificial stone, ceramics, glass, metals, and most plastics. It gives good adhesive on damp surfaces and has good resistance to UV.

COLOURS AVAILABLE

• White
• Black (minimum quantities apply)
• Grey (minimum quantities apply)

Featured Properties

• High bond strength on nearly all surfaces
• Fast curing
• Interior and exterior use
• Can be applied to damp surfaces
• Acid, isocyanate and solvent free
• Resistant to Chemicals & Petrol (10% dilute acids/alkalis, most solvents)
• Overpaintable with all water based paints
• Resistance to most chemicals

Sizes available

• 290ml cartridge (12 per carton)

PREPARATION AND APPLICATION

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.

Recommended application temperature is within the range of 1°C to 30°C

Insert the cartridge into a suitable applicator, e.g. a skeleton gun, or pneumatic applicator. Slit the cap and screw on the nozzle. If required, slit the nozzle to increase the size of the orifice.

Dispense the bead of adhesive on one side of the substrates to be bonded.

Bring substrates together and apply pressure to ensure full contact.

For porous surfaces Aro-Seal® 1139 Primer may be used to improve the cure, where preliminary adhesion tests indicate that it would be advisable. Likewise, where necessary, Aro-Seal® Surface Activator may be used on non-porous surfaces.

Handling and Storage

Cladstikk® 30 should be stored in the original cartridges in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months.