Ureka Global Ltd
(formerly Alansons Industries Ltd)
7 Flowers Hill
Brislington
Bristol
BS4 5JJ

+44 (0)117 971 1364
sales@thenamethatsticks.com

G1 Adhesive Dispensing Gun

The G1 Dispensing Gun is a battery operated tool used for fast, efficient and clean dispensing of 3ltr sachets such as Turfstikk 200.

(Formerly known as Gekko G1 Dispensing Gun)

 

Order a Sample

Click the button below, fill in your details and we’ll put it in the post.

Order a Sample

Need help?

Call us on +44 (0)117 971 1364 or click the button below.

Request a call

PRODUCT OVERVIEW

The G1's innovative dispenser head allows clean and precise application across the width of the area to be bonded.  Using the correct settings, no adhesive spills on to areas it shouldn't and no adhesive is left uncovered.

The dispenser heads are available in widths of 180mm (7”), 300mm (12”) and 400mm (16”). Dispenser nozzles are disposable. Sachets of adhesive are quick and easy to load without any contact with the glue; leaving workspaces and operators clean. As they are used, the sachets are compressed, so that empty sachets form small discs which are easily disposed of. This system ensures best yield and minimal waste.

(Formerly known as Gekko G1 Dispensing Gun)

 

PREPARATION AND APPLICATION

1.  Install battery pack into tool.  Align the base of the power tool with the noth inside the battery and slide the battery pack firmly into the handle until you hear the lock snap into place.  To turn the power tool on, squeeze the trigger switch.  To turn the tool off, release the trigger switch.  Trigger lock safeguards against inadvertent release of material

2.  Trigger switch and speed dial.  Turn the speed dial to an appropriate speed for your application. Then, press the trigger switch to start the flow of material. Release the trigger switch to stop the flow.

3.  Plunger rod handle.  To adjust plunger rod press & hold the plunger rod release trigger. Push or pull plunger rod handle to desired position.  Release plunger rod release trigger.

4.  Removing the dispenser head.  Turn the dispenser head anti-clockwise to unscrew from the barrel. Do not pull or cross the thread as this will render the applicator inoperable.

5.  Loading/re-loading an adhesive sachet.  While squeezing the plunger rod release trigger, pull back the plunger completely. Insert the adhesive sachet into the barrel and cut off the sealing clip. Turn  dispenser head clockwise to screw dispenser head back on to the barrel.  

6.  Applying the adhesive.  Apply consistent pressure to the trigger to dispense adhesive. Releasing the trigger instantly stops the adhesive flow. Pull the applicator at a steady pace.

7.  Removing a used adhesive sachet.  Unlock and remove dispenser head, and allow plunger to push out the used sachet. Clean out any adhesive residue in the barrel. Dispose of sachet according to local waste regulations.

HANDLING AND STORAGE

When not in use, place applicator on its side on a stable surface where it will not fall or caus a trip or fall hazard. Do no leave unused for more than 15 minutes because adhesive will begin to skin over setting time dependent on adhesive being used. Refer to technical data sheet.  Transport your applicator empty and with the rack fully closed.

Clean barrel and lubricate spreader thread with damp cloth after each use. Do not use chemicals or similar which may damage parts. Never immerse tool in liquid or allow liquid to get inside the tool.  Lubricate barrel with silicone spray after every 10 sachets of adhesive.

Never allow dirt and dust to enter the rack mechanism.  Never use an applicator with a broken or bent barrel or rack.  Always check dispenser hole is clear before loading a new adhesive sachet.  Avoid getting adhesive on battery pack.

(Formerly known as Gekko G1 Dispensing Gun)

 

Reviews

5 StarsMartin Rae from Leanti Kitchens1 Years Ago

Have just taken the applicator out and set it up and done a small amount. Its an excellent bit of kit - absolutely brilliant. Does exactly what its meant to.

5 StarsSteve Green from Be-Plas1 Years Ago

The use of the multi-bead system helped to reduce installation time by 3 days from the budgeted program

5 StarsJames from Floorscape2 Years Ago

Really pleased with you adhesive systems. I have to say they are probably the best adhesives in the country

5 StarsCallum at Kentwood Flooring2 Years Ago

Everyone wants Stickdown floors at the moment.  You must love us.  I used to hate stickdown floors, but now I love them.

Average Rating

5 Stars
5/5

Questions & AnswersQ&A's

Click the button above to ask a question.

Downloads

PDF

G1 Adhesive Dispensing Gun Operations Manual

pdf

Download

PDF

Woodstikk G1 Technical Data Sheet

pdf

Download

Let’s get stuck in.

Got an adhesives problem? Let our sticky smarts work for you.

Call us+44 (0)117 971 1364

Email ussales@thenamethatsticks.com

Get how-to advice, industry news and new innovations — straight to your inbox.