Ureka Global Ltd
(formerly Alansons Industries Ltd)
7 Flowers Hill
Brislington
Bristol
BS4 5JJ

+44 (0)117 971 1364
sales@thenamethatsticks.com

Gekko G57 High Performance Premium Surface Tackifier

Gekko G57 provides a permanently tacky film of adhesive which prevents carpets tiles from moving when in place but still allows the tiles to be lifted up if required. The benefits of low odour, accurate application & ultra-fast installation times makes this a favourite with installers.

Add to Basket
Coverage Calculator
Available for deliverySpend £400.00 to get free delivery.

Order a Sample

Click the button below, fill in your details and we’ll put it in the post.

Order a Sample

Need help?

Call us on +44 (0)117 971 1364 or click the button below.

Request a call

Product overview

Gekko G57 provides a permanently tacky film of adhesive which prevents carpet tiles from moving when in place but still allows the tiles to be lifted up if required.

The unique portable, fully contained canister system allows you to stand up and apply the adhesive. This will reduce knee injury, reduce labour time and increase efficiency, resulting in increased profitability for the installer.

The versatility, portability and easy application control makes this a leading system in today’s market.

Sizes available

22ltr canister

USE WITH QUIN TACKIFIER SPRAY KICK OFF KIT

 

The surfaces to be glued must be sound, clean, dry and free from dust, grease and other contaminants. Existing floors must be free from all polish/wax. Prime/stabilise friable concrete/anhydrite and floors with residual adhesive with a suitable primer before application.

Subject to recommendations made by the flooring manufacturer, subfloors should be subject to 28 days of maturing and should have a maximum of 3% moisture content or 70% equilibrium relative humidity before using this adhesive. The room in which the floor is being installed should be in excess of 15°C and register an ambient humidity between 40% and 70% while the adhesive is being used. For moisture contents between 3.1% and 7%, or over 70% relative humidity, a suitable primer and moisture barrier should be used. Do not use this adhesive above these recommendations. Very porous or friable surfaces should first be primed with Gekko G91 Primer and allowed to dry. Under floor heating must be turned off 48 hours before and 48 hours after the adhesive has been applied. It is extremely important to monitor ambient conditions throughout installation, as any change in these conditions could cause issues such as condensation, which could directly impact the success of the bond even though the substrate reading may appear correct.

SHAKE WELL BEFORE USE. Hold spray gun tip approx. 20 - 30cm from the surface to be covered and apply even coats. Do not allow it to concentrate or puddle in one area. Once adhesive has tacked off, generally within 1 - 3 minutes, carpet tiles can be laid.

Disposal of canisters: please request disposal information.

 

Reviews

There are no reviews for this product.

Average Rating

Not enough reviews

Questions & AnswersQ&A's

Click the button above to ask a question.

Downloads

PDF

Gekko G57 High Performance Premium Surface Tackifier techncial data sheet

pdf

Download

Coverage Calculator

Use our adhesive coverage calculator to find out how much you need for your project.

Based on your m2 you need:

ltr of Gekko G57 High Performance Premium Surface Tackifier.

Including 10% wastage.

How do we calculate this?

1ltr of Gekko G57 High Performance Premium Surface Tackifier covers 27m2. You require enough product to cover m2 including 10% wastage. m2 / 27m2 per ltr = ltr of product.

Calculate Coverage

Coverage Calculator

Use our adhesive coverage calculator to find out how much you need for your project.

Based on your m2 you need:

ltr of Gekko G57 High Performance Premium Surface Tackifier.

Including 10% wastage.

How do we calculate this?

1ltr of Gekko G57 High Performance Premium Surface Tackifier covers 27m2. You require enough product to cover m2 including 10% wastage. m2 / 27m2 per ltr = ltr of product.

Calculate Coverage

Let’s get stuck in.

Got an adhesives problem? Let our sticky smarts work for you.

Call us+44 (0)117 971 1364

Email ussales@thenamethatsticks.com

Get how-to advice, industry news and new innovations — straight to your inbox.