Klebo KG150 Contact Adhesive Spreader 150mm

Product overview

Klebo KG150 provides clean, quick application of solvent-based contact adhesives. It comes with a double-edged serrated application comb which is suitable for smooth, coarse, uneven, or absorbent surfaces. Users can efficiently apply an even, thin film of adhesive to both large and small surface areas.

Specially designed for the application of solvent contact adhesive. Each unit comes with a double edged serrated application comb for smooth, coarse surfaces or uneven and absorbent surfaces. The applicator comb width is 150mm. Can also be used on narrow edges by using the reducing slide.

Featured properties

• Up to 30% savings can achieved during application when compared with normal hand-applied spreaders.
• Considerable time saving.
• Always ready to use.
• Automatic stopper allows storage of adhesive within unit.
• No loss of solvent through evaporation whilst in use.

Pour adhesive into glue container & attach using the securing ring to mail body of spreader. Open air vent on the handle & adjust spread rate via screw - this will provide the operator with the most efficient coverage of adhesive suitable for application. If required, on narrow width boards (less than 150mm) the Klebo Glue Spreader has a reducing slide that can be adjusted to suit end-user requirements. After use detach the glue container & use the lid to seal the container for efficient storage of adhesive. It is essential to clean the spreading comb & head mechanism with an appropriate solvent based cleaned after use.